The LM5022 device is a high-voltage, low-side, N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features required to implement single-ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feedforward. The LM5022 includes a start-up regulator that operates over a wide input range of 6 V to 60 V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 2.2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line undervoltage lockout, cycle-by-cycle current limit, slope compensation, soft start, external synchronization capability, and thermal shutdown. The LM5022 is available in the 10-pin VSSOP package.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | LM5022 60-V Low-Side Controller for Boost and SEPIC datasheet (Rev. J) | PDF | HTML | 2018/05/21 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Technical article | What is behind isolated DC/DC converter voltage regulation? | PDF | HTML | 2015/08/31 | |
| White paper | How to design boost, SEPIC or flyback regulators with wide VIN power ICs | 2014/07/29 | ||
| Application note | Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co | 2014/07/11 | ||
| Application note | AN-1696 Designing a Boost LED Driver Using the LM5022 (Rev. B) | 2013/05/06 | ||
| Application note | AN-1656 Design Challenges of Switching LED Drivers (Rev. A) | 2013/05/03 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The LM5022EVM evaluation module (EVM) is a fixed frequency (500-kHz) non-synchronous boost converter providing fixed 40.0-V output at up to 500 mA from a 9-V to 16-V input. The EVM is designed to start up from a single supply, with no additional bias voltage required for start-up. The module uses (...)
This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.