LM5030
- Internal High-Voltage Start-Up Regulator
- Single Resistor Oscillator Setting
- Synchronizable
- Error Amplifier
- Precision Reference
- Adjustable Softstart
- Dual Mode Overcurrent Protection
- Slope Compensation
- Direct Optocoupler Interface
- 1.5-A Peak Gate Drivers
- Thermal Shutdown
The LM5030 high-voltage PWM controller contains all of the features needed to implement push-pull and bridge topologies, using current-mode control in a small 10-pin package. This device provides two alternating gate driver outputs. The LM5030 includes a high-voltage start-up regulator that operates over a wide input range of 14 V to 100 V. Additional features include: error amplifier, precision reference, dual mode current limit, slope compensation, softstart, sync capability, and thermal shutdown. This high speed IC has total propagation delays less than 100 ns and a 1-MHz capable single-resistor adjustable oscillator.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기 | 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | LM5030 100-V Push-Pull Current Mode PWM Controller datasheet (Rev. D) | PDF | HTML | 2015/11/24 |
| White paper | Power Electronics in Motor Drives: Where is it? (Rev. A) | 2019/10/01 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | Is Your IGBT Gate-Driver Power Supply Optimized | 2015/03/12 | ||
| Application note | LM5030 Application: DC - DC Converter Utilizing the Push-Pull Topology | 2007/03/21 | ||
| White paper | PWM DC-DC Cntrllrs w/Built-In Strt-Up Regs Simp Switch Pwr Supply Design | 2005/10/01 | ||
| White paper | Communications System Power Supply Designs | 2004/01/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
레퍼런스 디자인
TIDA-01352 — 400W, 연속, 확장성, ±2.5~±150V, 프로그래머블 초음파 전원 공급 장치 레퍼런스 설계
TIDA-01352는 초음파 전송 회로에 전원을 공급하기 위한 디지털 프로그래머블 전원 공급 장치에 적합한 솔루션을 제공하여 모듈식 및 효율적인 전원 확장 기능을 제공합니다. 이 설계는 푸시-풀 토폴로지를 사용하여 HV(고전압) 및 LV(저전압) 또는 중간 전압 전원 공급 장치를 생성합니다. HV 레일은 ±50V~±150V까지 프로그래밍할 수 있고, LV 또는 MID 레일은 ±2.5V~±50V까지 프로그래밍할 수 있습니다. 이 전원 공급 장치는 각 레일에서 100W의 연속 전력을 제공할 수 있습니다. 프로그래밍 기능은 온보드, (...)
레퍼런스 디자인
TIDA-00181 — 4출력을 지원하는 절연 IGBT 게이트 드라이브 푸시-풀 전원 공급 장치
This reference design provides isolated positive and negative voltage rails required for Insulated Gate Bipolar Transistor (IGBT) gate drivers from a single 24-volt DC input supply. IGBTs are used in three phase inverters for variable-frequency drives to control the speed of AC motors. This (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
| WSON (DPR) | 10 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.