The LM5067 negative hot swap controller provides intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other “hot” power sources. The LM5067 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass N-Channel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). In addition, the LM5067 provides circuit protection by monitoring for over-current and over-voltage conditions. The POWER GOOD output indicates when the output voltage is close to the input voltage. The input under-voltage and over-voltage lockout levels and hysteresis are programmable, as well as the fault detection time. The LM5067-1 latches off after a fault detection, while the LM5067-2 automatically attempts restarts at a fixed duty cycle. The LM5067 is available in a 10-pin VSSOP package and a 14-pin SOIC package.
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM5067 Negative Hot Swap / Inrush Current Controller with Power Limiting datasheet (Rev. D) | PDF | HTML | 2020/08/27 |
| Application note | Extend LM5067 Applications With an External Auxiliary Source | PDF | HTML | 2024/01/31 | |
| Application note | Basics of Power Switches (Rev. A) | PDF | HTML | 2019/04/26 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Selection guide | Hot Swap Selection Tool | 2015/07/28 | ||
| Application note | Robust Hot Swap Design (Rev. A) | 2015/04/08 | ||
| EVM User's guide | AN-1723 LM5067 Evaluation Board (Rev. A) | 2013/05/06 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The LM5067EVAL evaluation board provides the design engineer with a fully functional hot swap controller board designed for negative voltage systems. This board contains an LM5067-2, the auto restart version of this IC. This application note describes the various functions of the board, how to test (...)
The LM5067 calculator tool can help simplify the process of creating a hot swap design. Enter system requirements such as input voltage range, current, and output capacitance and the calculator will guide the user towards component selection. The tool may also be used to evaluate an existing (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| SOIC (NPA) | 14 | 옵션 보기 |
| VSSOP (DGS) | 10 | 옵션 보기 |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.
제품 세부 정보 페이지에서 지원을 확인하십시오.
TVS diode recommendation tool
Initial release of TVS diode recommendation tool.