LM74701-Q1
- AEC-Q100 qualified with the following results
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- 3.2-V to 65-V input range (3.9-V startup)
- –33-V reverse voltage rating
- Charge pump for external N-Channel MOSFET
- 20 mV ANODE to CATHODE forward voltage drop regulation
- 1-µA shutdown current (EN = Low)
- 80-µA operating quiescent current (EN = High)
- 2-A peak gate turn-off current
- Fast response to reverse current blocking: < 0.75 µs
- Integrated battery voltage monitoring switch (SW)
- Meets automotive ISO7637 transient requirements without additional input TVS diode (TVS less)
- 8-Pin SOT-23 package 2.90 mm × 1.60 mm
The LM74701-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode for low loss reverse polarity protection with a 20-mV forward voltage drop. LM74701-Q1 is suitable for input protection of 12-V automotive systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems.
The device controls the GATE of the MOSFET to regulate the forward voltage drop at 20 mV. The regulation scheme enables graceful turn-off of the MOSFET during a reverse current event and ensures zero DC reverse current flow. Fast response (< 0.75 µs) to reverse current blocking makes the device suitable for systems with output voltage holdup requirements during ISO7637 pulse testing as well as power fail and input micro-short conditions. The LM74701-Q1 has a unique integrated VDS clamp feature which enables users to achieve TVS less input polarity protection solution and save on average a typical 60% of PCB space in constrained automotive systems.
The LM74701-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. With the enable pin low, the controller is off and draws approximately 1 µA of current.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | LM74701-Q1 TVS Less Automotive Reverse Battery Protection Ideal Diode Controller datasheet (Rev. A) | PDF | HTML | 2021. 12. 14 | ||
| 기능 안전 정보 | LM74701-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2024. 1. 24 | |||
| 아날로그 디자인 학술지 | Going TVS-less in Automotive Reverse Battery Protection Designs | PDF | HTML | 2021. 11. 18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM74701Q1EVM — VDS 클램프가 통합된 이상적 다이오드 컨트롤러용 LM74701-Q1 평가 모듈
설계자는 LM74701-Q1 평가 모듈(LM74701Q1EVM)을 이용해 VDS 클램프가 통합된 LM74701-Q1 이상적인 다이오드 컨트롤러의 작동 및 성능을 평가할 수 있습니다. 이 평가 모듈(EVM)은 N채널 전력 MOSFET을 사용하여 낮은 IQ LM74701-Q1 컨트롤러로 입력 역전압 보호를 실현하는 방법을 보여줍니다.
TIDA-010253 — 에너지 저장 시스템을 위한 배터리 제어 장치 레퍼런스 디자인
이 레퍼런스 디자인은 고전압 리튬 이온(리튬-이온), 리튬 인산철(LiFePO4) 배터리 랙을 위한 중앙 컨트롤러입니다. 이 디자인은 고전압 릴레이, 통신 인터페이스(RS-485, CAN(컨트롤러 영역 네트워크), 데이지 체인 및 이더넷 포함), 습도 센서에 대한 확장 가능한 인터페이스, 고전압 아날로그-디지털 컨버터(ADC) 및 전류 센서를 위한 구동 회로를 제공합니다.
이 디자인은 고성능 마이크로컨트롤러를 사용하여 애플리케이션을 개발 및 테스트합니다. 이러한 기능을 통해 고용량 배터리 랙 애플리케이션의 중앙 컨트롤러에 이 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.