LMK05318B-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 2: –40°C to 105°C
- Ultra-low jitter BAW VCO based Ethernet clocks
- 50fs typical RMS jitter at 312.5MHz
- 60fs typical RMS jitter at 156.25MHz
- One high-performance Digital Phase-Locked Loop (DPLL) paired with two Analog Phase Locked Loops (APLLs):
- Programmable DPLL loop bandwidth
- < 1-ppt DCO frequency adjustment step size
- Two differential or single-ended DPLL inputs
- 1Hz (1-PPS) to 800MHz input frequency
- Digital holdover and hitless switching
- Eight differential outputs with programmable HSDS/LVPECL, LVDS, HSCL and 1.8V LVCMOS output formats.
- Up to six different output frequencies
- 1Hz (1-PPS) to 1250MHz output frequency
- PCIe Gen 1 to 6 compliant
- I2C or SPI register control bus
- EEPROM for custom system configurations on start-up
The LMK05318B-Q1 is high-performance network synchronizer clock device that provides jitter cleaning, clock generation, advanced clock monitoring, and superior hitless switching performance to meet the stringent timing requirements of communications infrastructure and industrial applications. The ultra-low jitter and high power supply noise rejection (PSNR) of the device can reduce bit error rates (BER) in high-speed serial links.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LMK05318B-Q1 Ultra-Low Jitter Network Synchronizer and Clock Generator With BAW VCO for Automotive and Industrial Applications datasheet | PDF | HTML | 2024/03/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMK05318BEVM — 네트워크 싱크로나이저 클록 평가 모듈
이 모듈은 LMK05318B 네트워크 싱크로나이저 클록 장치용 평가 모듈(EVM)입니다.
EVM은 신속한 평가, 규정 준수 테스트 및 시스템 프로토타이핑을 위한 유연한 동기 클록 소스로 사용할 수 있습니다. SMA 포트는 50Ω 테스트 장비와 상호 작용하기 위한 LMK05318B 클록 입력 및 출력에 대한 액세스를 제공합니다. 온보드 XO 옵션이 포함되어 있지만 다양한 XO/TCXO/OCXO 풋프린트 옵션을 사용하거나 외부 SMA 입력을 사용하지 않고 다시 작업할 수 있습니다. EVM은 LMK05318B의 I2C/SPI (...)
CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN (RGZ) | 48 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.