홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

LMR70410-Q1

미리 보기

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
SOT-23-THN (DDC) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LMR70410-Q1 4V to 40V, 1A Automotive Synchronous Buck Converter datasheet PDF | HTML 2026. 10. 9

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMR70410QEVM — LMR70410-Q1 평가 모듈

LMR70410-Q1 평가 모듈(EVM)은 LMR704XX-Q1 장치 제품군의 성능을 평가할 수 있는 작동 회로도 및 플랫폼을 제공합니다. EVM은 5.5V~40V의 넓은 입력 전압 범위에서 작동하여 정전압 5V 출력을 제공합니다. 이 EVM은 최대 1A 부하를 처리하도록 설계되었습니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
SOT-23-THN (DDC) 6 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상