전력 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)

LMZ13610

활성

최대 입력 전압 36V를 지원하는 10A SIMPLE SWITCHER® 전원 모듈

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPSM63610 활성 7.5mm x 6.5mm HotRod™ QFN의 고밀도 36V 입력, 1V~20V 출력, 8A 전원 모듈 Significantly smaller footprint, lower EMI, higher efficiency and optional spread spectrum.

제품 상세 정보

Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 10 Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 6 Vout (min) (V) 0.8 Features EMI Tested, Enable, Tracking Operating temperature range (°C) -40 to 85 Type Module Duty cycle (max) (%) 85 Control mode Peak current mode Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404
Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 10 Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 6 Vout (min) (V) 0.8 Features EMI Tested, Enable, Tracking Operating temperature range (°C) -40 to 85 Type Module Duty cycle (max) (%) 85 Control mode Peak current mode Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404
TO-PMOD (NDY) 11 266.85 mm² 15 x 17.79
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Fixed Switching Frequency (350 kHz)
  • Flexible Start-up Sequencing Using External Soft-
    Start, Tracking and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Junction Temperature Range –40°C to 125°C
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fully Enabled for WEBENCH® Power Designer
  • Pin Compatible With LMZ22010/08,
    LMZ12010/08, LMZ23610/08/06H, and
    LMZ13608/06H
  • Performance Benefits
    • High Efficiency Reduces System Heat
      Generation
    • Low Radiated Emissions (EMI) Tested to
      EN55022 Class B Standard
    • Only 7 External Components
    • Low Output Voltage Ripple
    • No External Heat Sink Required
  • Electrical Specifications
    • 50-W Maximum Total Output Power
    • Up to 10-A Output Current
    • Input Voltage Range 6 V to 36 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%(1)
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Fixed Switching Frequency (350 kHz)
  • Flexible Start-up Sequencing Using External Soft-
    Start, Tracking and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Junction Temperature Range –40°C to 125°C
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fully Enabled for WEBENCH® Power Designer
  • Pin Compatible With LMZ22010/08,
    LMZ12010/08, LMZ23610/08/06H, and
    LMZ13608/06H
  • Performance Benefits
    • High Efficiency Reduces System Heat
      Generation
    • Low Radiated Emissions (EMI) Tested to
      EN55022 Class B Standard
    • Only 7 External Components
    • Low Output Voltage Ripple
    • No External Heat Sink Required
  • Electrical Specifications
    • 50-W Maximum Total Output Power
    • Up to 10-A Output Current
    • Input Voltage Range 6 V to 36 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%(1)

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ13610 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6 V and 36 V and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ13610 only requires two external resistors and three external capacitors to complete the power solution. The LMZ13610 is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output over-voltage protection, short circuit protection, output current limit, and allows start-up into a prebiased output.

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ13610 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6 V and 36 V and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ13610 only requires two external resistors and three external capacitors to complete the power solution. The LMZ13610 is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output over-voltage protection, short circuit protection, output current limit, and allows start-up into a prebiased output.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
10개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LMZ13610 10-A SIMPLE SWITCHER Power Module With 36-V Maximum Input Voltage datasheet (Rev. G) PDF | HTML 2015/11/09
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016/01/20
Application note AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013/05/06
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013/04/23
Application note AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013/04/23
Application note AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013/04/23
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMZ13610DEMO — 36V Simple Switcher® 모듈 10A 데모 보드

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6V and 36V. (...)

TI.com에서 구매할 수 없음
평가 보드

LMZ13610EVAL — 36V Simple Switcher® 모듈 10A 평가 보드

The LMZ13610/8 and LMZ12010/8 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610/8 can accept an input voltage rail (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

LMZ13610 Load_Transient TINA-TI Transient Reference Design

SNVMAG6.TSC (103 KB) - TINA-TI Reference Design
시뮬레이션 모델

LMZ13610 TINA-TI Average Reference Design

SNVMAH0.TSC (87 KB) - TINA-TI Reference Design
시뮬레이션 모델

LMZ13610 TINA-TI Average Spice Model

SNVMAG9.ZIP (8 KB) - TINA-TI Spice Model
시뮬레이션 모델

LMZ13610 TINA-TI Transient Spice Model

SNVMAG5.ZIP (16 KB) - TINA-TI Spice Model
시뮬레이션 모델

LMZ13610 Unencrypted PSpice Average Model

SNVM761.ZIP (1 KB) - PSpice Model
시뮬레이션 모델

LMZ13610 Unencrypted PSpice Average Model Package (Rev. A)

SNVM251A.ZIP (47 KB) - PSpice Model
시뮬레이션 모델

LMZ13610 Unencrypted PSpice Transient Model

SNVM760.ZIP (2 KB) - PSpice Model
시뮬레이션 모델

LMZ13610 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM252A.ZIP (159 KB) - PSpice Model
시뮬레이션 모델

LMZ13610_Startup TINA-TI Reference Design

SNVMAG7.TSC (123 KB) - TINA-TI Reference Design
시뮬레이션 모델

LMZ13610_Steady_state TINA-TI Reference Design

SNVMAG8.TSC (136 KB) - TINA-TI Reference Design
패키지 CAD 기호, 풋프린트 및 3D 모델
TO-PMOD (NDY) 11 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상