LP8733-Q1
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Input voltage: 2.8 V to 5.5 V
- Two high-efficiency step-down DC/DC converters:
- Output voltage: 0.7 V to 3.36 V
- Maximum output current 3 A per phase
- Adding and shedding auto phase and force multi-phase operations in dual-phase configuration
- Remote differential feedback voltage sensing in dual-phase configuration
- Programmable output-voltage slew rate from 0.5 mV/µs to 10 mV/µs
- 2-MHz switching frequency
- Spread-spectrum mode and phase interleaving for EMI reduction
- Two linear regulators:
- Input voltage: 2.5 V to 5.5 V
- Output voltage: 0.8 V to 3.3 V
- Maximum output current 300 mA
- Configurable general-purpose output signals (GPO, GPO2)
- Interrupt function with programmable masking
- Programmable power-good signal (PGOOD)
- Output short-circuit and overload protection
- Overtemperature warning and protection
- Overvoltage protection (OVP) and undervoltage lockout (UVLO)
- 28-pin, 5-mm × 5-mm VQFN package with wettable flanks
The LP8733xx-Q1 is designed to meet the power management requirements in automotive applications. The device has two step-down DC/DC converters (which can be configured as a single dual-phase regulator or two single-phase regulators), two linear regulators, and two general-purpose digital-output signals. The device is controlled by an I2C-compatible serial interface and by an enable signal.
The automatic PWM/PFM (AUTO mode) operation together with the automatic phase adding/shedding gives high efficiency over a wide output-current range. The LP8733xx-Q1 supports remote voltage sensing (differential in dual-phase configuration) to compensate IR drop between the regulator output and the point-of-load (POL), thus improving the accuracy of the output voltage. In addition, the switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.
The LP8733xx-Q1 device supports programmable start-up and shutdown delays and sequences including GPO signals synchronized to the enable signal. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the in-rush current.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LP8733xx-Q1 Dual High-Current Buck Converter and Dual Linear Regulator datasheet (Rev. A) | PDF | HTML | 2021. 6. 4 | |
| * | 사용 설명서 | LP873362-Q1 Technical Reference Manual | PDF | HTML | 2025. 6. 27 | |
| * | 사용 설명서 | LP87334A-Q1 Technical Reference Manual | PDF | HTML | 2021. 10. 4 | |
| 사용 설명서 | Power Supply Design for Renesas R-Car M3 (Rev. A) | 2021. 10. 29 | |||
| 사용 설명서 | Single LP8733-Q1 User's Guide to Power DRA78x and TDA3 (Rev. A) | PDF | HTML | 2021. 3. 31 | ||
| Application brief | The Benefits of FlexPower PMIC Devices (Rev. B) | PDF | HTML | 2020. 11. 23 | ||
| 애플리케이션 노트 | How to Design Flexible Processor Power Systems Using PMICs (Rev. B) | 2020. 1. 27 | |||
| 사용 설명서 | LP8733-Q1 and LP8732-Q1 User’s Guide to Power DRA78x, and TDA3x (Rev. C) | 2018. 11. 20 | |||
| 사용 설명서 | LP8733-Q1 and LP8732-Q1 Configuration Guide (Rev. A) | PDF | HTML | 2018. 10. 1 | ||
| 사용 설명서 | Power Solution for the NXP i.MX8 Processor | 2018. 8. 8 | |||
| 사용 설명서 | LP8733-Q1 and LP8732-Q1 User’s Guide to Power DRA71x, DRA79x, and TDA2E-17 (Rev. A) | 2018. 7. 10 |
설계 및 개발
전원 공급 솔루션
LP8733-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
LP87330Q1EVM — LP873300-Q1 I²C 구성 가능 듀얼 고전류 벅 컨버터 및 듀얼 선형 레귤레이터 EVM
LP87330Q1EVM은 텍사스 인스트루먼트의 통합 회로 LP873300-Q1을 보여줍니다.
LP873300-Q1에는 차량용 애플리케이션에서 최신 애플리케이션 프로세서의 전원 관리 요구 사항을 충족하도록 설계된 고성능 스텝다운 컨버터 2개와 LDO 2개가 있습니다. LP873300-Q1은 솔루션 크기와 효율성을 탁월하게 조합하여 최대 3A + 3A의 부하 전류를 구동할 수 있습니다. LP873300-Q1은 다양한 전압 및 시퀀싱 요구 사항에 맞춰 시작 시 PMIC를 쉽게 구성할 수 있도록 특수 설계되었습니다. 이 장치는 PC 및 (...)
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
TIPA-050049 — 차량용 애플리케이션을 위한 R-Car M3N 및 M3W 전원 공급 장치 설계
Renesas R-Car M3x SoC용 전원 공급 장치 설계는 차량용 인포테인먼트, 전자 콕핏 및 게이트웨이 애플리케이션에 최적화되어 있습니다. 이 사용 설명서에서는 LP87565-Q1, LP8733-Q1 및 LP8732-Q1 PMIC를 사용하는 Renesas R-Car M3N 및 R-Car M3W SoC 전원 레일의 전원 설계 고려 사항을 설명합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHD) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.