TDA2E
- Architecture designed for ADAS applications
- Video, image, and graphics processing
support
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video inputs and video outputs
- Arm® Cortex®-A15 microprocessor subsystem
- C66x floating-point VLIW DSP cores
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
- Up to 512KB of on-chip L3 RAM
- Level 3 (L3) and level 4 (L4) interconnects
- DDR3/DDR3L External Memory Interface (EMIF)
module
- Supports up to DDR3-1333 (667 MHz)
- Up to 2GB across single chip select
- Dual Arm® Cortex®-M4 Image Processing Units (IPU)
- IVA-HD subsystem
- Display
subsystem
- Display controller with DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- Single-core PowerVR® SGX544 3D GPU
- 2D-graphics accelerator (BB2D) subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- One Video Input Port (VIP) module
- Support for up to four multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) controller
- 2-Port Gigabit Ethernet switch
- Up to two external ports, one internal
- Sixteen 32-bit general-purpose timers
- 32-bit MPU watchdog timer
- Six high speed Inter-Integrated Circuit (I2C™) ports
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad Serial Peripheral Interface (QSPI™)
- SATA interface
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- High Speed USB 2.0 dual-role device
- High Speed USB 2.0 on-the-go
- Four MultiMedia Card/Secure Digital®/Secure Digital Input Output interfaces (MMC™/SD®/SDIO)
- PCI-Express® (PCIe®) revision 3.0 Port with integrated PHY
- One 2-lane gen2-compliant port
- or Two 1-lane gen2-compliant ports
- Dual Controller Area Network (DCAN)
modules
- CAN 2.0B protocol
- MIPI® Camera Serial Interface 2 (CSI-2)
- Up to 215 General-Purpose I/O (GPIO) pins
- Real-Time Clock subsystem (RTCSS)
- Device Security Features
- Hardware crypto accelerators and DMA
- Firewalls
- JTAG lock
- Secure keys
- Secure ROM and boot
- Customer programmable keys (Silicon Revision 2.1)
- Power, reset, and clock management
- On-chip debug with CTools technology
- 28-nm CMOS technology
- 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ABC)
TI’s new TDA2Ex System-on-Chip (SoC) is a highly optimized and scalable family of devices designed to meet the requirements of leading Advanced Driver Assistance Systems (ADAS). The TDA2Ex family enables broad ADAS applications in today’s automobile by integrating an optimal mix of performance, low power, and ADAS vision analytics processing that aims to facilitate a more autonomous and collision-free driving experience.
The TDA2Ex SoC enables sophisticated embedded vision technology in today’s automobile by enabling a board range of ADAS applications including park assist, surround view and sensor fusion on a single architecture.
The TDA2Ex SoC incorporates a heterogeneous, scalable architecture that includes a mix of TI’s fixed and floating-point TMS320C66x digital signal processor (DSP) generation core, Arm® Cortex®-A15 MPCore™ and dual-Arm® Cortex®-M4 processors. The integration of a video accelerator for decoding multiple video streams over an Ethernet AVB network, along with graphics accelerator for rendering virtual views, enable a 3D viewing experience. The TDA2Ex SoC also integrates a host of peripherals including multicamera interfaces (both parallel and serial, including CSI-2) to enable Ethernet or LVDS-based surround view systems, displays and GigB Ethernet AVB.
Additionally, TI provides a complete set of development tools for the Arm® and DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment is available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The TDA2Ex ADAS processor is qualified according to the AEC-Q100 standard.
추가 정보 요청
이 제품군은 대량 자동차 제조업체가 사용할 수 있습니다. 자세한 내용은 TI 판매 담당자에 문의하십시오.
고급 운전자 지원 시스템(ADAS)용 TDA2E SoC에 대해 자세히 알아보십시오.
기술 자료
설계 및 개발
전원 공급 솔루션
TDA2E에 사용 가능한 전원 공급 솔루션을 찾아보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
D3-3P-DEV — AI 카메라, 하드웨어, 드라이버 및 펌웨어에 대한 D3 임베디드 지원
D3 Embedded는 미국에 본사를 둔 기업으로, 비전과 mmWave 레이더 감지, 연결, 임베디드 프로세싱, AI를 통합해 고성능 응용 분야를 위한 포괄적인 솔루션을 제작하는 전문 업체입니다. D3 Embedded는 개발 부문에서 25년 넘게 축적한 경력을 바탕으로 사용자 지정 소프트웨어와 하드웨어 개발 서비스, ISP 기반 이미지 튜닝, AI와 알고리즘, 복잡한 DSP 프로세싱 체인 개발 서비스를 제공합니다. 특히 사내 전문가로 구성된 레이더 및 DSP 팀은 텍사스 인스트루먼트의 애플리케이션별 프로세서에 적합한 맞춤형 (...)
D3-3P-RVP-TDA2X — TDA2 프로세서용 D3 임베디드 DesignCore® RVP-TDA2x 개발 키트
RVP-TDA2x는 하이엔드 ADAS 시스템을 위한 다중 카메라 플랫폼입니다. ARM A15 애플리케이션 프로세서 2개, 최대 4개의 EVE(Vision Acceleration PAC) 코프로세서, 하드웨어 가속 H.264 인코더가 포함되어 있습니다. 개발 키트는 8개의 카메라 입력을 지원하지만 필요에 따라 사용자 지정할 수 있습니다. 키트 구매에는 소프트웨어 배포 및 일회용 라이센스가 포함됩니다.
PROCESSOR-SDK-RADAR — RTOS Processor SDK for Radar
Processor SDK-Vision(Vision SDK) 및 Processor SDK-Radar(Radar SDK)는 TDAx 프로세서용 멀티 프로세서 소프트웨어 개발 키트입니다. 소프트웨어 프레임워크는 사용자가 레이더 및 비디오 캡처, 레이더 처리, 비디오 캡처, 비디오 전처리, 비디오 분석 알고리즘 및 비디오 디스플레이와 관련된 여러 ADAS 애플리케이션 데이터 흐름을 만들도록 지원합니다. . 또한 이 릴리스에는 프로세서 SDK Linux가 통합되어 Linux 및 GPU가 필요한 차량용 ADAS 기능과 데모를 지원합니다. (...)
PROCESSOR-SDK-VISION — Linux and RTOS Processor SDK for Vision
Processor SDK-Vision(Vision SDK) 및 Processor SDK-Radar(Radar SDK)는 TDAx 프로세서용 멀티 프로세서 소프트웨어 개발 키트입니다. 소프트웨어 프레임워크는 사용자가 레이더 및 비디오 캡처, 레이더 처리, 비디오 캡처, 비디오 전처리, 비디오 분석 알고리즘 및 비디오 디스플레이와 관련된 여러 ADAS 애플리케이션 데이터 흐름을 만들도록 지원합니다. . 또한 이 릴리스에는 프로세서 SDK Linux가 통합되어 Linux 및 GPU가 필요한 차량용 ADAS 기능과 데모를 지원합니다. (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
CLOCKTREETOOL — Sitara, 오토모티브, 비전 분석 및 디지털 신호 프로세서용 클록 트리 툴
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCBGA (ABC) | 760 | Ultra Librarian |