홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨버터
신규

TLV612901

활성

5.5V, 8A, synchronous boost converter with bypass mode, I2C interface and fast transient response

지금 주문하기
데이터 시트

TLV612901

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 8 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI & noise features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 8 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI & noise features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
DSBGA (YBG) 16 2.486929 mm² (1.577 mm × 1.577 mm)
  • 1.8V to 5.5V wide VIN range
    • 2.2V start-up input voltage
  • Programmable average input current limit (3.5A to 11A) through I2C, default 8A
  • Programmable output voltage (2.35V to 5.5V) through I2C, default 5.0V
  • High efficiency and power capability
    • Default 8A average input current limit
    • Two 8mΩ (LS) / 8mΩ (HS) MOSFETs
    • 10mΩ bypass MOSFET
    • 96.3% peak efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 1.5A
    • Up to 94.4% efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 4A
  • Auto bypass mode when VIN > VOUT
  • Auto PFM, forced PWM or ultrasonic mode selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and overcurrent protection
  • Output short-circuit protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package
  • 1.8V to 5.5V wide VIN range
    • 2.2V start-up input voltage
  • Programmable average input current limit (3.5A to 11A) through I2C, default 8A
  • Programmable output voltage (2.35V to 5.5V) through I2C, default 5.0V
  • High efficiency and power capability
    • Default 8A average input current limit
    • Two 8mΩ (LS) / 8mΩ (HS) MOSFETs
    • 10mΩ bypass MOSFET
    • 96.3% peak efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 1.5A
    • Up to 94.4% efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 4A
  • Auto bypass mode when VIN > VOUT
  • Auto PFM, forced PWM or ultrasonic mode selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and overcurrent protection
  • Output short-circuit protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package

The TLV612901 is a 5.5V, 11A synchronous boost converter with integrated bypass mode for single-cell battery-powered systems. The device operates over a wide input voltage range and supports startup from 2.2V. The output voltage is programmable through I2C, ranging from 2.35V to 5.5V, with a default value of 5.0V. The TLV612901 is optimized for high power capability, fast transient response, and high efficiency across a wide battery operating range.

The TLV612901 can be used as a high-power pre-regulator to overcome input voltage droop and input current limitations of the powered system while extending battery run time. When the input voltage is higher than the target output voltage, the device automatically enters bypass mode for maximum efficiency. When the input voltage drops below the target output voltage, the device seamlessly transitions into boost mode to maintain the regulated output voltage and enable full use of the battery capacity. The device also supports forced bypass operation through I2C.

The TLV612901 also supports selectable light-load operating mode, output discharge during shutdown, and true disconnection between input and output. The TLV612901 is available in a 16-ball WCSP package.

The TLV612901 is a 5.5V, 11A synchronous boost converter with integrated bypass mode for single-cell battery-powered systems. The device operates over a wide input voltage range and supports startup from 2.2V. The output voltage is programmable through I2C, ranging from 2.35V to 5.5V, with a default value of 5.0V. The TLV612901 is optimized for high power capability, fast transient response, and high efficiency across a wide battery operating range.

The TLV612901 can be used as a high-power pre-regulator to overcome input voltage droop and input current limitations of the powered system while extending battery run time. When the input voltage is higher than the target output voltage, the device automatically enters bypass mode for maximum efficiency. When the input voltage drops below the target output voltage, the device seamlessly transitions into boost mode to maintain the regulated output voltage and enable full use of the battery capacity. The device also supports forced bypass operation through I2C.

The TLV612901 also supports selectable light-load operating mode, output discharge during shutdown, and true disconnection between input and output. The TLV612901 is available in a 16-ball WCSP package.
filter 기타 DC/DC 컨버터 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TLV612901 5.5V, 11A Synchronous Boost Converter With Bypass Mode and I2 C Interface datasheet PDF | HTML 2026. 8. 12

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YBG) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상