펌웨어
SBOC483 — TMP107 Firmware
지원되는 제품 및 하드웨어
제품
디지털 온도 센서
- TMP107 — 데이지 체인 UART, EEPROM 및 알림 기능을 지원하는 ±0.4°C 온도 센서
하드웨어 개발
평가 보드
- BOOSTXL-TMP107 — TMP107 온도 센서 데이지 체인 BoosterPack™ 플러그인 모듈
TMP107
- High Accuracy (Without Calibration):
- ±0.4°C (max) from –20°C to +70°C
- ±0.55°C (max) from –40°C to +100°C
- ±0.7°C (max) from –55°C to +125°C
- High Resolution: 14 Bits (0.015625°C)
- UART-Compatible, SMAART Wire™ Interface:
- Allows Up To 32 Daisy-Chained Devices
- EEPROM Memory for Unique Addressing, Trip Level Programming, and General-Purpose Storage
- Continuous Conversion and Shutdown Mode for Power Savings
- One-Shot Conversion Mode for Custom Update Rates and Power Savings
- Programmable Alert Feature
- Operating Temperature Range: –55°C to +125°C
- Operating Supply Range: 1.7 V to 5.5 V
- Package: SOIC-8
The TMP107 digital output temperature sensor supports a total of 32 daisy-chained devices. Each sensor has a unique 5-bit address stored in electrically-erasable programmable memory (EEPROM). The TMP107 is capable of reading temperatures with a resolution of 0.015625°C, and is accurate to within ±0.4°C in the range from –20°C to +70°C. The TMP107 is ideal for replacing NTC and PTC thermistors where high accuracy is required.
The unique 5-bit address stored in the EEPROM is determined during the automated address assignment operation, and is based on the position of each sensor relative to the SMAART wire host. Multiple operating modes provide maximum flexibility in selecting between low power consumption for battery operation, and high update rates for real-time control applications.
The TMP107 is ideal for extended temperature measurement in a variety of industrial, instrumentation, communication, and environmental applications. The TMP107 is available in an 8-pin SOIC package and is specified for operation over a temperature range of −55°C to +125°C.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TMP107 Digital Temperature Sensor With Bidirectional UART One-Wire Interface and EEPROM datasheet (Rev. D) | PDF | HTML | 2020/01/13 |
| Application note | How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) | PDF | HTML | 2025/01/21 | |
| Application note | Interfacing TMP107 SMAART Wire™ Temperature Sensors Over CAN or RS-485 Physical | PDF | HTML | 2021/03/11 | |
| Application brief | Efficient Cold Chain Management With Scalable High-Accuracy Temperature Sensors (Rev. A) | PDF | HTML | 2020/12/11 | |
| User guide | BOOST-TMP107 User's Guide | 2017/06/22 | ||
| Technical article | Cold chain in the IoT | PDF | HTML | 2015/11/20 | |
| Application note | Easy-to-use Cabling Interface for Measuring Temperature with the TMP107 (Rev. A) | 2015/10/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
BOOSTXL-TMP107 — TMP107 온도 센서 데이지 체인 BoosterPack™ 플러그인 모듈
BOOSTXL-TMP107 BoosterPack 모듈은 LaunchPad 개발 키트에 3개의 고정밀 온도 센서를 추가합니다. 이러한 센서는 최대 32개의 센서를 직렬로 연결하는 긴 케이블링에 적합한 1선 직렬 프로토콜을 갖추고 있습니다. PCB의 분리 가능한 섹션을 통해 사용자는 온도 센서를 다른 위치에 배치할 수 있습니다.
사용 설명서: PDF
평가 보드
TMP107EVM — TMP107 평가 모듈
This TMP107EVM includes a USB-to-SMAART Wire interface and four TMP107 devices to evaluate in a daisy-chain. The SMAART Wire interface is a bidirectional UART, so only three conductors are needed between devices, which the TMP107EVM provides. The computer interface board has a solderless (...)
사용 설명서: PDF
레퍼런스 디자인
TIDA-00800 — SensorTag용 데이지 체인 온도 센서 레퍼런스 디자인
The TIDA-00800 reference design entails 4 temperature sensors along a daisy chain in a cabling environment. The sensors connect to the SensorTag development platform via the UART interface where the information can be transmitted wirelessly. The Bluetooth low energy wireless technology (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치