TPS1686
- Input operating voltage range: 9V to 80V
- 92V absolute maximum
- Withstands negative voltages up to –5V at output
- Integrated FET with low on resistance: RON = 16mΩ (typ)
- Active high enable input with adjustable undervoltage lockout (UVLO)
- Adjustable overvoltage protection
- Adjustable output slew rate control (dVdt) for inrush current protection
- Precise load current monitoring
- <3% error for >50% current
- 1MHz bandwidth
- Robust overcurrent protection
- Circuit-breaker response
- Adjustable threshold: 1A to 10A
- Overcurrent protection accuracy: ±3% (typ)
- Adjustable transient overcurrent timer (ITIMER) to support peak currents
- Fast trip response to short-circuit events
- Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
- FET SOA: 0.8W√s
- FET health monitoring and reporting
- Fault indication pin (FLT )
- Power Good indication pin (PGOOD)
- UL 2367 recognition (planned)
- IEC 62368-1 CB certification (planned)
- Small footprint: QFN 6mm × 5mm
- IPC9592B clearance for 60V
The TPS1686x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT to optimize server and data-center performance.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS1686x 9V to 80V , 16mΩ, 10A Integrated Hotswap (eFuse) with Accurate and Fast Current Monitor datasheet (Rev. A) | PDF | HTML | 2025/11/03 |
| Certificate | TPS1686-87EVM EU Declaration of Conformity (DoC) | 2025/06/09 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (NLM) | 23 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.