TPS23731
- Complete IEEE 802.3bt Type 3 (Class 1-4) and 802.3at PoE PD Solution
- EA Gen 2 logo-ready (PoE 2 PD Controller)
- Robust 100-V, 0.3-Ω (typ) Hotswap MOSFET
- Supports power levels for up to 30-W operation
- Integrated PWM controller for flyback configuration
- Flyback control with
primary-side regulation
- Supports CCM operation
- ±1.5% (typ, 5-V output) load regulation (0-100% load range) — with Sync FET
- ±3% (typ, 12-V output) load regulation (5-100% load range) — diode rectified
- Also supports secondary-side regulation
- Soft-start control with advanced startup and hiccup mode overload protection
- Soft-stop shutdown
- Adjustable frequency with synchronization
- Programmable frequency dithering for EMI
- Flyback control with
primary-side regulation
- Automatic Maintain Power Signature (MPS)
- Auto-adjust to PSE type and load current with auto-stretch
- Primary adapter priority input
- –40°C to 125°C junction temperature range
The TPS23731 device combines a Power over Ethernet (PoE) powered device (PD) interface, and a current-mode DC-DC controller optimized for flyback switching regulator designs where the use of primary-side regulation (PSR) is supported. The PoE interface supports the IEEE 802.3bt and IEEE 802.3at standard s for applications needing up to 25.5 W or less at PD input.
Programmable spread spectrum frequency dithering (SSFD) is provided to minimize the size and cost of EMI filter. Advanced Startup with adjustable soft-start helps to use minimal bias capacitor while simplifying converter startup and hiccup design, also ensuring that IEEE 802.3bt /at startup requirements are met.
The soft-stop feature minimizes stress on switching sync FET(s), allowing FET BOM cost reduction.
The PSR feature of the DC-DC controller uses feedback from an auxiliary winding for control of the output voltage, eliminating the need for external shunt regulator and optocoupler. It is optimized for continuous conduction mode (CCM), and can work with secondary side synchronous rectification, resulting in optimum efficiency, regulation accuracy and step load response over multiple outputs.
The DC-DC controller features slope compensation and blanking. Typical switching frequency is 250 kHz.
The automatic MPS enables applications with low power modes or multiple power feeds. It automatically adjusts its pulsed current amplitude and duration according to PSE Type and system conditions, to maintain power while minimizing consumption.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS23731 IEEE 802.3bt Type 3 Class 1-4 PoE PD with No-Opto Flyback DC-DC Controller datasheet | PDF | HTML | 2020. 10. 2 | |
| 애플리케이션 노트 | PoE Powered Devices Debug Guidelines | PDF | HTML | 2021. 7. 19 | ||
| 애플리케이션 노트 | PoE PD Schematic Review Guidelines | PDF | HTML | 2021. 4. 29 | ||
| 인증서 | TPS23731EVM-095 EU RoHs Declaration of Conformity (DoC) | 2020. 11. 13 | |||
| 애플리케이션 노트 | Soft-Stop: TPS2373X Feature Explanation | PDF | HTML | 2020. 10. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS23731EVM-095 — TPS23731 IEEE802.3bt 타입 3 클래스 4 PoE PD 애플리케이션 평가 모듈
TPS23731 평가 모듈(EVM)(TPS23731EVM-095)에는 클래스 4(25.5W) PoE PD 애플리케이션에 적합한 IEEE802.3bt 유형 3 클래스 4 PoE PD 컨트롤러인 TPS23731에 대한 평가 및 레퍼런스 회로가 포함되어 있습니다.
PMP22806 — 클래스 4 PoE PD 절연 플라이백 컨버터(12V/2.1A) 1차측 조정 레퍼런스 설계
이 레퍼런스 디자인은 12V 및 2.1A 출력을 지원하는 PoE(Power over Ethernet) PD 플라이백 컨버터를 구현합니다. TPS23731 PD 및 PWM 컨트롤러는 PoE PD 제어 및 플라이백 컨버터에 대한 PWM 제어를 구현하는 데 필요한 모든 기능을 제공합니다. TPS23731은 옵토커플러 피드백의 필요성을 없애주는 1차측 조정(PSR)을 사용합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RMT) | 45 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.