TPS2597
- Wide operating input voltage range: 2.7 V to 23 V
- 28-V absolute maximum
- Integrated FET with low on-resistance: R ON = 9.8 mΩ (typ.)
- Fast overvoltage protection
- Overvoltage clamp (OVC) with pin-selectable threshold (3.89 V, 5.76 V, 13.88 V) and 5-µs (typical) response time or
- Adjustable overvoltage lockout (OVLO) with 1.2-µs (typical) response time
- Overcurrent protection with load current monitor output (ILM)
- Active current limit or circuit-breaker options
- Adjustable threshold (I LIM) 0.87 A – 7.7 A
- ±10% accuracy for I LIM > 1.74 A
- Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × I LIM
- Output load current monitor accuracy: ±8% (max)
- Fast-trip response for short-circuit protection
- 550-ns (typical) response time
- Adjustable (2 × I LIM) and fixed thresholds
- Active high enable input with adjustable undervoltage lockout threshold (UVLO)
- Adjustable output slew rate control (dVdt)
- Overtemperature protection
- Digital outputs
- Fault indication (FLT) or
- Power-Good indication (PG) with adjustable threshold (PGTH)
- UL 2367 recognition
- File No. E339631
- R ILM ≥ 750 Ω
- IEC 62368-1 CB certified
- Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
The TPS2597xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.
Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if the input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor.
The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS2597xx 2.7 V–23 V, 7-A, 9.8-mΩ eFuse With Accurate Current Monitor and Transient Overcurrent Blanking datasheet (Rev. C) | PDF | HTML | 2023/04/13 |
| Certificate | TPS2597x CB Test Certificate IEC 62368-1 | 2023/01/11 | ||
| Certificate | TPS2597x UL2367 Certificate of Compliance E169910 | 2023/01/11 | ||
| Certificate | TPS2597x UL2367 Certificate of Compliance E339631 | 2023/01/11 | ||
| Application note | How eFuse Ensures Integrated FET Operation in Safe Operating Area | PDF | HTML | 2022/09/07 | |
| User guide | TPS2597EVM: Evaluation Module for TPS2597 eFuse (Rev. A) | PDF | HTML | 2021/12/07 | |
| Certificate | TPS2597EVM EU RoHS Declaration of Conformity (DoC) | 2021/09/20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS2597EVM — TPS2597 2.7V~23-V, 7-A, 10mΩ eFuse용 평가 모듈
TPS2597EVM eFuse 평가 보드는 텍사스 인스트루먼트(TI)의 TPS2597xx eFuse에 대한 레퍼런스 회로 평가를 지원합니다. TPS2597xx 디바이스는 과전류, 돌입 전류 보호, 조정 가능한 과전류 과도 블랭킹 타이머, 프로그래머블 저전압 및 과전압 보호 기능을 지원하는 통합 10mΩ FET를 사용하는 2.7V~23V, 7A eFuse입니다.
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
지원되는 제품 및 하드웨어
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| VQFN-HR (RPW) | 10 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.