홈 전력 관리 고압측 스위치 및 컨트롤러 고압측 스위치
홈
전력 관리
고압측 스위치 및 컨트롤러
고압측 스위치
신규

TPS2HC120-Q1

활성

저전력 모드를 지원하는 차량용, 2채널 120mΩ 스마트 고압측 스위치

지금 주문
데이터 시트

TPS2HC120-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Number of channels 2 Rating Automotive Operating voltage (max) (V) 18 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 120 Imax (A) 2.5 Current limit (max) (A) 2.5 Current limit (min) (A) 0.25 Current limit type Adjustable FET Internal Features Current sense/monitor, Digital output, Thermal shutdown, Under voltage lock out Current sense accuracy ±3% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 2 Rating Automotive Operating voltage (max) (V) 18 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 120 Imax (A) 2.5 Current limit (max) (A) 2.5 Current limit (min) (A) 0.25 Current limit type Adjustable FET Internal Features Current sense/monitor, Digital output, Thermal shutdown, Under voltage lock out Current sense accuracy ±3% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
HVSSOP (DGQ) 28 34.79 mm² 7.1 x 4.9
  • Dual-channel 120mΩ smart high-side switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low power mode (LPM) with automatic entry and exit
    • IQ,LPM <20µA/ch with both channels ON and in LPM mode
  • Ultra-low standby current, <1µA at 25°C
  • Selectable current limit, 0.25A to 5A
  • Protection
    • Overload and short-circuit protection
    • Thermal shutdown and swing protection
    • Inductive load negative voltage clamp
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 28-pin thermally-enhanced HVSSOP package
  • Dual-channel 120mΩ smart high-side switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low power mode (LPM) with automatic entry and exit
    • IQ,LPM <20µA/ch with both channels ON and in LPM mode
  • Ultra-low standby current, <1µA at 25°C
  • Selectable current limit, 0.25A to 5A
  • Protection
    • Overload and short-circuit protection
    • Thermal shutdown and swing protection
    • Inductive load negative voltage clamp
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 28-pin thermally-enhanced HVSSOP package

TPS2HC120-Q1 is an automotive dual-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 12V automotive battery systems. The low RON (120mΩ) minimizes the device power dissipation when driving a wide range of output load current up to 2A when both channels are enabled or 2.5A when only one channel is enabled.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS2HC120-Q1 implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device offers 10 selectable current limit settings (0.25A to 5A) based on the external resistor used on the ILIM pin. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance.

TPS2HC120-Q1 is available in a 28-pin, 4.9mm × 7.1mm HVSSOP leaded package with 0.5mm pin pitch minimizing the PCB footprint.

TPS2HC120-Q1 is an automotive dual-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 12V automotive battery systems. The low RON (120mΩ) minimizes the device power dissipation when driving a wide range of output load current up to 2A when both channels are enabled or 2.5A when only one channel is enabled.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS2HC120-Q1 implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device offers 10 selectable current limit settings (0.25A to 5A) based on the external resistor used on the ILIM pin. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance.

TPS2HC120-Q1 is available in a 28-pin, 4.9mm × 7.1mm HVSSOP leaded package with 0.5mm pin pitch minimizing the PCB footprint.
filter 기타 고압측 스위치 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet TPS2HC120-Q1 120mΩ Dual-Channel Smart High-Side Switch datasheet (Rev. A) PDF | HTML 2025/08/12
Certificate TPS2HC120EVM EU Declaration of Conformity (DoC) 2025/01/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS2HC120EVM — TPS2HC120-Q1 평가 모듈

TPS2HC120EVM은 TPS2HC120-Q1 고압측 스위치의 기능과 성능을 평가하는 데 사용되는 하드웨어 EVM(평가 모듈)입니다. 이 평가 모듈은 TPS2HC120-Q1을 테스트하여 다양한 전원 시스템 애플리케이션에 디바이스를 손쉽게 통합할 수 있도록 지원합니다. TPS2HC120EVM은 전압 공급 및 출력 부하가 연결된 독립형 보드로 사용하도록 설계되었습니다. 과전류, 접지 단락, 개방 부하 및 배터리 단락 감지와 같은 기능을 평가 모듈에서 사용할 수 있습니다.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
HVSSOP (DGQ) 28 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상