TPS3809-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C5
- 3-Pin SOT-23 Package
- Supply Current of 9 µA (Typical)
- Precision-Supply Voltage Monitor 2.5 V, 3 V, 3.3 V, 5 V
- Power-On Reset Generator With Fixed Delay Time of 200 ms
- Pin-For-Pin Compatible With MAX 809
The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems. The newer TLV809E device is an alternative with the same pins, functions and electrical parameters.
During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td(typ) = 200 ms, starts after VDD has risen above the threshold voltage VIT. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed sense-threshold voltage VIT set by an internal voltage divider.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in a 3-pin SOT-23. The TPS3809xxx-Q1 devices are characterized for operation over a temperature range of −40°C to 125°C, and are qualified in accordance with AEC-Q100 stress test qualification for integrated circuits.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS3809xxx-Q1 3-Pin Supply Voltage Supervisors datasheet (Rev. C) | PDF | HTML | 2020. 12. 23 | |
| 애플리케이션 노트 | Voltage Supervisors (Reset ICs): Frequently Asked Questions (FAQs) (Rev. A) | 2020. 3. 17 | |||
| 선택 가이드 | Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) | 2020. 2. 28 | |||
| e북 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019. 6. 28 | |||
| 설계 가이드 | TIDA-00141 Overview | 2014. 5. 7 | |||
| 테스트 보고서 | TIDA-00141 Test Results | 2014. 4. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-00141 — 플립업 디스플레이용 차량용 브러시드 모터 드라이버
이 TIDA-00141 레퍼런스 설계는 푸시-투-오픈 및 푸시-투-클로즈 모터 드라이브 시스템을 위한 빠른 설정 가이드를 제공하여 인포테인먼트 시스템의 플립업 디스플레이 작동을 활성화합니다. 이 솔루션은 두 가지 피드백 방식도 함께 보여줍니다. 하나는 리미트 스위치를 사용하는 방식이고, 다른 하나는 모터 드라이버의 전류 제한 설정을 활용하는 방식입니다. 출시 일정을 앞당기기 위해 빠른 솔루션을 구현하는 이 설계는 차량용으로 인증된 모든 장치를 사용하고, 배터리에 직접 연결할 수 있으며, 소프트웨어 작업이 필요하지 않습니다. 이 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 3 | Ultra Librarian |