TPS5430-Q1

Name: TPS5430-Q1
Brand: TI
SKU: TPS5430-Q1
Price: 2.096 USD

활성

차량용 5.5V~36V, 500kHz 고정 주파수 3A 벅 컨버터

지금 주문하기

데이터 시트

document-pdfAcrobat TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

LMR33630AP-Q1

활성

오토모티브 3.8V~36V, 3A 동기 스텝다운 전압 컨버터 Smaller footprint, higher efficiency, lower IQ and lower EMI.

TPS5430-Q1

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Automotive

Topology

Buck

Iout (max) (A)

3

Vin (max) (V)

36

Vin (min) (V)

5.5

Vout (max) (V)

31

Vout (min) (V)

1.22

Features

Enable, Fixed soft start, Overcurrent protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

Duty cycle (max) (%)

89

Rating

Automotive

Topology

Buck

Iout (max) (A)

3

Vin (max) (V)

36

Vin (min) (V)

5.5

Vout (max) (V)

31

Vout (min) (V)

1.22

Features

Enable, Fixed soft start, Overcurrent protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

Duty cycle (max) (%)

89

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

filter

기타 DC/DC converters 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

1개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E)	PDF \| HTML	2024/01/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS5430EVM-173 — TPS5430 35V 입력, 5V 출력, 3A 평가 모듈

The TPS5430EVM-173 evaluation module allows the designer to evaluate the TPS5430 SWIFT DC/DC converter and is designed with external components to operate over a wide input voltage range. The input voltage range of this module is 9.0 V to 36 V and the output voltage is pre-set to (...)

사용 설명서: PDF | HTML