계산 툴
데이터시트
이 제품의 최신 버전이 있습니다
TPS54541
- High Efficiency at Light Loads with Pulse Skipping Eco-mode™
- 87-mΩ High-Side MOSFET
- 152-µA Operating Quiescent Current and 2-µA Shutdown Current
- 100-kHz to 2.5-MHz Adjustable Switching Frequency
- Synchronizes to External Clock
- Low Dropout at Light Loads with Integrated BOOT Recharge FET
- Adjustable UVLO Voltage and Hysteresis
- UV and OV Power-Good Output
- Adjustable Soft-Start and Sequencing
- 0.8-V 1% Internal Voltage Reference
- 10-Pin WSON with Thermal Pad Package
- –40°C to 150°C TJ Operating Range
- Create a Custom Design using the TPS54541 with the WEBENCH® Power Designer
The TPS54541 device is a 42-V 5-A step-down regulator with an integrated high-side MOSFET. The device survives load dump pulses up to 45 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load supply current to 152 µA. When the enable pin is pulled low, the shutdown supply current is reduced to 2 µA.
Undervoltage lockout is internally set at 4.3 V but can increase using an external resistor divider at the enable pin. The output voltage startup ramp is controlled by the soft-start pin that can also be configured for sequencing and tracking. An open-drain power-good signal indicates the output is within 93% to 106% of the nominal voltage.
A wide adjustable switching-frequency range allows for optimization of either efficiency or external component size. Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protect internal and external components during an overload condition.
The TPS54541 device is available in a 10-pin 4-mm × 4-mm WSON package.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기5 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54541 4.5-V to 42-V Input, 5-A Step-Down DC-DC Converter With Soft-Start and Eco-mode™ datasheet (Rev. C) | PDF | HTML | 2017/01/20 |
| EVM User's guide | Evaluation Module for the TPS54541 Step-Down Converter | 2013/11/05 | ||
| Application note | Creating a Universal Car Charger for USB Devices From the TPS54240 and TPS2511 (Rev. E) | 2013/09/16 | ||
| Application note | Create a Split-Rail Power Supply with a Wide Input Voltage Buck Regulator (Rev. A) | 2012/10/26 | ||
| Application note | Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) | 2012/10/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS54541EVM-555 — TPS54541EVM-555 - 4.5V~42V 입력 5A 스텝다운 DC-DC 컨버터 평가 모듈
The TPS54541EVM-555 is a fully assembled and tested circuit for evaluating the TPS54541 Step-Down Converter. The TPS54541EVM-555 operates from a 6.0V to 42V input (12V nominal) and provides a 3.3V output at 5.0A.
사용 설명서: PDF
시뮬레이션 모델
TPS54541 Unencrypted PSpice Transient Model Package (Rev. A)
SLVM981A.ZIP (740 KB) - PSpice Model
레퍼런스 디자인
PMP15018 — 1.2V@10A 및 1V@10A의 듀얼 출력 전압을 사용하는 산업용 15V~42V VIN 전력 레퍼런스 디자인
The PMP15018 reference design incorporates the TPS54541 42V 5A DC/DC converter and two TPS56C215 17V, 12A DC/DC converters. The solution operates from 15V to 42V input and generates 1.0V @10A and 1.2V@10A voltage rails. The 1.0V and 1.2V converters operate at 1MHz and 400kHz (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| WSON (DPR) | 10 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치