The TPS57140-EP device is a 42-V, 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load, regulated output supply current to 116 µA. Using the enable pin reduces the shutdown supply current to 1.5 µA.
UVLO is internally set at 2.5 V, but can be increased using the enable pin. The slow-start pin, which is also configurable for sequencing or tracking, controls the output voltage start-up ramp. An open-drain power-good signal indicates the output is within 92% to 109% of its nominal voltage.
A wide switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS57140-EP is available in a 10-pin VSON package (DRC).
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS57140-EP 1.5-A 42-V Step-Down DC/DC Converter With Eco-mode™ Control datasheet (Rev. B) | PDF | HTML | 2019/05/03 |
| * | Radiation & reliability report | TPS57140MDRCREP Reliability Report | 2016/02/09 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
This worksheet is designed for use with Microsoft Excel 2002 or later. It intends to assist circuit designers in their day-to-day calculations
This worksheet includes two sections:
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| VSON (DRC) | 10 | 옵션 보기 |