TPS60150
- 2.7-V to 5.5-V Input Voltage Range
- Fixed Output Voltage of 5 V
- Maximum Output Current: 140 mA
- 1.5-MHz Switching Frequency
- Typical 90-µA Quiescent Current at No Load
Condition (Skip Mode) - X2 Charge Pump
- Hardware Enable and Disable Function
- Built-in Soft Start
- Built-in Undervoltage Lockout Protection
- Thermal and Overcurrent Protection
- Available in a 2-mm × 2-mm 6-Pin SON Package
with 0.8-mm Height
The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5 V from an unregulated input voltage.
The 5-V output can supply a minimum of 140-mA current.
The TPS60150 device operates in skip mode when the load current falls less than 8 mA under typical condition. In skip mode operation, quiescent current is reduced to 90 µA.
Only 3 external capacitors are needed to generate the output voltage, therefore saving PCB space.
Inrush current is limited by the soft-start function during power on and power transient states.
The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2-mm × 2-mm 6-pin SON package (QFN).
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS60150 5-V, 140-mA Charge-Pump datasheet (Rev. C) | PDF | HTML | 2015/10/29 |
| Application note | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023/12/06 | |
| Application note | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017/06/15 | ||
| Technical article | How to overcome automotive front-end design challenges | PDF | HTML | 2015/09/10 | |
| User guide | TPS60150EVM-359 User's Guide (Rev. C) | 2010/07/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS60150EVM-359 — TPS60150EVM-359 평가 모듈
The TPS60150EVM-359 facilitates evaluation of the TPS60150 150mA Charge Pump.
PMP10652 — 차량에 필요한 모든 보호 기능을 갖춘 30W ADAS 시스템을 위한 시스템 수준 레퍼런스 디자인
The design has various protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Innovative Smart diode with very low Iq), Battery Disconnect Switch with OVP protection (PFET) and is EMI (...)
PMP9492 — CISPR 25 후방 카메라, 오토모티브 ADAS 시스템용 클래스 5 멀티 출력 전원 공급 장치 레퍼런스 디자인
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| WSON (DRV) | 6 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치