홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨버터
신규

TPS61383-Q1

활성

Automotive, 400kHz, 36V, 30A boost converter with buck, LDO charger and battery health detection

지금 주문하기
데이터 시트

TPS61383-Q1

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Automotive Topology Buck/Boost Vin (max) (V) 12 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Switch current limit (typ) (A) 30 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread Spectrum, Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Automotive Topology Buck/Boost Vin (max) (V) 12 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Switch current limit (typ) (A) 30 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread Spectrum, Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
WQFN-FCRLF (RAV) 24 12 mm² 4 x 3
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT pin) up to 20V, 40V absolute maximum to withstand load dump
    • Wide battery voltage operating range: 0V to 12V
    • Supports multi-chemistry battery charging profile of 1-5 cell NiMH, 1-2 cell Li-Ion, LiFePO4, 1-4 cell super capacitor
    • Programmable charging current up to 5A
    • Charge 25F super capacitor from 0V to 8.1V within 20s, fast charge for e-latch application
    • Programmable NiMH charging timer up to 32h
    • NTC input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery backup power system
    • Programmable output voltage range: 5V to 12V
    • Programmable average current limit: 5A to 30A
    • backup battery (BUB) voltage in boost mode: 0.5V to 12V
      • Minimum 3V for start-up when Vout < 2.8V
      • 1V start-up when Vout > 2.8V
    • < 20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery state-of-health (SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current. and battery temperature
  • Lower quiescent current and leakage current
    • 21µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the backup battery
  • EMI mitigation
    • 400kHz fix switching frequency
    • Optional programmable spread spectrum
  • 3mm × 4mm, 25-pin package with wettable flank
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT pin) up to 20V, 40V absolute maximum to withstand load dump
    • Wide battery voltage operating range: 0V to 12V
    • Supports multi-chemistry battery charging profile of 1-5 cell NiMH, 1-2 cell Li-Ion, LiFePO4, 1-4 cell super capacitor
    • Programmable charging current up to 5A
    • Charge 25F super capacitor from 0V to 8.1V within 20s, fast charge for e-latch application
    • Programmable NiMH charging timer up to 32h
    • NTC input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery backup power system
    • Programmable output voltage range: 5V to 12V
    • Programmable average current limit: 5A to 30A
    • backup battery (BUB) voltage in boost mode: 0.5V to 12V
      • Minimum 3V for start-up when Vout < 2.8V
      • 1V start-up when Vout > 2.8V
    • < 20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery state-of-health (SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current. and battery temperature
  • Lower quiescent current and leakage current
    • 21µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the backup battery
  • EMI mitigation
    • 400kHz fix switching frequency
    • Optional programmable spread spectrum
  • 3mm × 4mm, 25-pin package with wettable flank

The TPS61383-Q1 is a 400kHz, 40V, 30A automotive bi-directional boost converter, buck charger with battery state of health detection function designed for backup power systems like TBOX or eCall. The converter supports absolute maximum voltage up to 40V on the VOUT pin to withstand load-dump condition and supports direct connection with 12V car battery. The TPS61383-Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4, super capacitor.

TPS61383-Q1 integrates boost function that operates over 0.5V to 12V BUB voltage and 5V – 12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A – 30A programmable average current limit.

The TPS61383-Q1 integrates battery health detection feature, which discharges the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61383-Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care must be taken when designing the PCB with TPS61383-Q1. See also Layout Example.

The TPS61383-Q1 is a 400kHz, 40V, 30A automotive bi-directional boost converter, buck charger with battery state of health detection function designed for backup power systems like TBOX or eCall. The converter supports absolute maximum voltage up to 40V on the VOUT pin to withstand load-dump condition and supports direct connection with 12V car battery. The TPS61383-Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4, super capacitor.

TPS61383-Q1 integrates boost function that operates over 0.5V to 12V BUB voltage and 5V – 12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A – 30A programmable average current limit.

The TPS61383-Q1 integrates battery health detection feature, which discharges the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61383-Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care must be taken when designing the PCB with TPS61383-Q1. See also Layout Example.
filter 기타 DC/DC 컨버터 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TPS61383-Q1 Automotive 400kHz, 40V, 30A Boost Converter With Buck/LDO Charger and Battery State of Health Detection datasheet PDF | HTML 2026/06/16
EVM User's guide TPS61383-Q1 Evaluation Module PDF | HTML 2026/06/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS61383QEVM-167 — TPS61383-Q1 evaluation module

The TPS61383QEVM-167 operates over a wide backup battery voltage range from 0V to 12V and main battery (VBAT port) voltage range from 0V to 40V to achieve a bi-directional operation. The EVM supports an output up to 7.5A load at 6V BUB and 12V output in boost mode, and supports from 50mA to 5A (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
계산 툴

TPS61383Q-SCAP-CALC — TPS61383-Q1 Super Capacitor Energy Calculation Tool.

TPS61383-Q1 Super Capacitor Energy Calculation Tool. This standalone tool assists the power supply engineer with the design of a super capacitor e-latch / CPM system using DC-DC converter
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
인증

TPS61383QEVM-167-DOC-CERT — [TPS61383QEVM-167] EU Declaration of Conformity (DoC)

[TPS61383QEVM-167] EU Declaration of Conformity (DoC)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN-FCRLF (RAV) 24 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상