TPS62120

Name: TPS62120
Brand: TI
SKU: TPS62120
Price: 0.511 USD

활성

DCS 제어를 지원하는 15V, 75mA, 96% 효율 스텝다운 컨버터

지금 주문하기

데이터 시트

document-pdfAcrobat TPS6212x 15-V, 75-mA Highly Efficient Buck Converter datasheet (Rev. A) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치와 유사한 기능

TPS629203

활성

SOT-583 패키지의 3V~17V, 0.3A, 저 IQ, 동기 벅 컨버터 Improved efficiency, smaller size and lower IQ.

TPS62120

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.075

Vin (max) (V)

15

Vin (min) (V)

2

Vout (max) (V)

5.5

Vout (min) (V)

1.2

Features

Enable, Light Load Efficiency, Output discharge, Power good, Synchronous Rectification

Control mode

Constant on-time (COT), DCS-Control

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000011

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.075

Vin (max) (V)

15

Vin (min) (V)

2

Vout (max) (V)

5.5

Vout (min) (V)

1.2

Features

Enable, Light Load Efficiency, Output discharge, Power good, Synchronous Rectification

Control mode

Constant on-time (COT), DCS-Control

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000011

Duty cycle (max) (%)

100

SOT-23 (DCN)

8

4.64 mm² 2.9 x 1.6

Wide Input Voltage Range: 2 V to 15 V
Up to 96% Efficiency
Power Save Mode With 11-µA Quiescent Current
Output Current 75 mA
Output Voltage Range: 1.2 V to 5.5 V
Up to 800-kHz Switch Frequency
Synchronous Converter, No External Rectifier
Low Output Ripple Voltage
100% Duty Cycle for Lowest Dropout
Small SOT 8-Pin (TPS62120) and 2-mm × 2-mm
DFN 6-Pin (TPS62122) Package
Internal Soft Start
Power Good Open Drain Output (TPS62120)
Open-Drain Output for Output Discharge
(TPS62120)
2.5-V Rising and 1.85-V Falling UVLO Thresholds

Wide Input Voltage Range: 2 V to 15 V
Up to 96% Efficiency
Power Save Mode With 11-µA Quiescent Current
Output Current 75 mA
Output Voltage Range: 1.2 V to 5.5 V
Up to 800-kHz Switch Frequency
Synchronous Converter, No External Rectifier
Low Output Ripple Voltage
100% Duty Cycle for Lowest Dropout
Small SOT 8-Pin (TPS62120) and 2-mm × 2-mm
DFN 6-Pin (TPS62122) Package
Internal Soft Start
Power Good Open Drain Output (TPS62120)
Open-Drain Output for Output Discharge
(TPS62120)
2.5-V Rising and 1.85-V Falling UVLO Thresholds

The TPS6212x device is a highly efficient synchronous step-down DC-DC converter optimized for low-power applications. The device supports up to 75-mA output current and allows the use of tiny external inductors and capacitors.

The wide operating input voltage range of 2 V to 15 V supports energy harvesting, battery powered and as well 9-V or 12-V line powered applications.

With its advanced hysteretic control scheme, the converter provides power save mode operation. At light loads the converter operates in pulse frequency modulation (PFM) mode and transitions automatically in pulse width modulation (PWM) mode at higher load currents. The power save mode maintains high efficiency over the entire load current range. The hysteretic control scheme is optimized for low output ripple voltage in PFM mode in order to reduce output noise to a minimum. The device consumes only 10-µA quiescent current from VIN in PFM mode operation.

In shutdown mode, the device is turned off.

An open-drain power good output is available in the TPS62120 and indicates once the output voltage is in regulation.

The TPS62120 has an additional SGND pin which is connected to GND during shutdown mode. This output can be used to discharge the output capacitor.

The TPS6212x operates over an free air temperature range of –40°C to 85°C. The TPS62120 is available in a small 8-pin SOT-23 package and the TPS62122 in a 2 mm × 2 mm 6-pin DFN package.

The TPS6212x device is a highly efficient synchronous step-down DC-DC converter optimized for low-power applications. The device supports up to 75-mA output current and allows the use of tiny external inductors and capacitors.

The wide operating input voltage range of 2 V to 15 V supports energy harvesting, battery powered and as well 9-V or 12-V line powered applications.

With its advanced hysteretic control scheme, the converter provides power save mode operation. At light loads the converter operates in pulse frequency modulation (PFM) mode and transitions automatically in pulse width modulation (PWM) mode at higher load currents. The power save mode maintains high efficiency over the entire load current range. The hysteretic control scheme is optimized for low output ripple voltage in PFM mode in order to reduce output noise to a minimum. The device consumes only 10-µA quiescent current from VIN in PFM mode operation.

In shutdown mode, the device is turned off.

An open-drain power good output is available in the TPS62120 and indicates once the output voltage is in regulation.

The TPS62120 has an additional SGND pin which is connected to GND during shutdown mode. This output can be used to discharge the output capacitor.

The TPS6212x operates over an free air temperature range of –40°C to 85°C. The TPS62120 is available in a small 8-pin SOT-23 package and the TPS62122 in a 2 mm × 2 mm 6-pin DFN package.

filter

기타 DC/DC converters 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

TPS62122

활성

15V, 75mA, 96% 효율 스텝다운 컨버터 Same product without PG pin and in a smaller package.

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

22개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	TPS6212x 15-V, 75-mA Highly Efficient Buck Converter datasheet (Rev. A)	PDF \| HTML	2015/07/31
	Application note	Using the TPS62120 in an Inverting Buck-Boost Topology (Rev. C)	PDF \| HTML	2022/11/29
	Application note	Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B)	PDF \| HTML	2022/05/23
	Selection guide	Buck Converter Quick Reference Guide (Rev. B)		2021/04/08
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		2019/06/14
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		2018/12/11
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		2018/06/22
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017/10/24
	Application note	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		2017/06/15
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		2016/10/24
	Analog Design Journal	Understanding frequency variation in the DCS-Control(TM) topology		2015/10/30
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		2015/08/17
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		2015/01/29
	Analog Design Journal	High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions		2013/07/25
	Application note	How to Measure the Control Loop of DCS-Control Devices (Rev. A)		2012/08/09
	Analog Design Journal	Design considerations for a resistive feedback divider in a DC/DC converter		2012/04/26
	White paper	Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D)		2012/03/28
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012/01/13
	Application note	Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C)		2012/01/12
	Application note	Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs		2011/09/19
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62120EVM-640 — TPS62120 평가 모듈

The TPS62120EVM-640 is a fully assembled and tested platform for evaluating the operation andperformance of the TPS62120 converter. The TPS62120EVM-640 has an input voltage range from 2.0 V up to 15 V, and the output voltage is adjustable with an external feedback divider network in the range of (...)

사용 설명서: PDF | HTML