전원 관리 AC/DC & DC/DC converters (integrated FET)

TPS62A02

활성

SOT563 및 SOT23 패키지의 2.5V~5.5V 입력, 2A 고효율 스텝다운 컨버터

제품 상세 정보

Iout (max) (A) 2 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000023, 0.023
Iout (max) (A) 2 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000023, 0.023
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8 SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • 2.5V to 5.5V input voltage range
  • 0.6V to VIN adjustable output voltage range
  • 180mΩ/120mΩ low RDSON switches (1A DRL)
  • 100mΩ/67mΩ low RDSON switches (1A DDC, 2A)
  • < 23µA quiescent current
  • 1% feedback accuracy (0°C to 125°C)
  • 100% mode operation
  • 2.4MHz switching frequency
  • Power save mode or PWM option available
  • Power-good output pin (optional)
  • Short-circuit protection (HICCUP)
  • Internal soft start-up
  • Active output discharge
  • Thermal shutdown protection
  • Pin-to-pin compatible with the TLV62585 (DRL)
  • Pin-to-pin compatible with the TLV62569 (DDC)
  • 2.5V to 5.5V input voltage range
  • 0.6V to VIN adjustable output voltage range
  • 180mΩ/120mΩ low RDSON switches (1A DRL)
  • 100mΩ/67mΩ low RDSON switches (1A DDC, 2A)
  • < 23µA quiescent current
  • 1% feedback accuracy (0°C to 125°C)
  • 100% mode operation
  • 2.4MHz switching frequency
  • Power save mode or PWM option available
  • Power-good output pin (optional)
  • Short-circuit protection (HICCUP)
  • Internal soft start-up
  • Active output discharge
  • Thermal shutdown protection
  • Pin-to-pin compatible with the TLV62585 (DRL)
  • Pin-to-pin compatible with the TLV62569 (DDC)

The TPS62A0x family of devices are synchronous step-down buck DC/DC converters optimized for high efficiency and compact design size. The devices integrate switches capable of delivering an output current up to 2A. At medium to heavy loads, the devices operate in pulse width modulation (PWM) mode with 2.4MHz switching frequency. At light load, the devices automatically enter power save mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is minimal as well. The TPS62A0xA variants of this device family operate in forced PWM across the whole load current range.

The TPS62A0x devices provide an adjustable output voltage through an external resistor divider. An internal soft-start circuit limits the inrush current during start-up. Other features like overcurrent protection, thermal shutdown protection, and power good (optional) are built-in. The devices are available in a SOT563 and SOT23-6 package.

The TPS62A0x family of devices are synchronous step-down buck DC/DC converters optimized for high efficiency and compact design size. The devices integrate switches capable of delivering an output current up to 2A. At medium to heavy loads, the devices operate in pulse width modulation (PWM) mode with 2.4MHz switching frequency. At light load, the devices automatically enter power save mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is minimal as well. The TPS62A0xA variants of this device family operate in forced PWM across the whole load current range.

The TPS62A0x devices provide an adjustable output voltage through an external resistor divider. An internal soft-start circuit limits the inrush current during start-up. Other features like overcurrent protection, thermal shutdown protection, and power good (optional) are built-in. The devices are available in a SOT563 and SOT23-6 package.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS62A01 활성 2.5V~5.5V 입력, 1A 출력 고효율 스텝다운 컨버터 Drop-in alternative with lower output current
TPS62A02A 활성 SOT 패키지의 강제 PWM을 지원하는 2.5V~5.5V 입력, 2A 고효율 스텝다운 컨버터 With forced PWM

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기6
유형 직함 날짜
* Data sheet TPS62A0x and TPS62A0xA, 1A, 2A High-Efficiency Synchronous Buck Converters in a SOT563 and a SOT23 Package datasheet (Rev. D) PDF | HTML 2024/04/04
Application note 배터리로 구동되는 카메라 및 비디오 초인종을 위한 전원 레일 설계 PDF | HTML 2023/09/19
EVM User's guide TPS62A02 and TPS62A02A Step-Down Converter Evaluation Module User's Guide PDF | HTML 2022/05/25
Certificate TPS62A02EVM-197 EU RoHS Declaration of Conformity (DoC) 2022/05/04
Application note How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022/01/20
Application note Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022/01/20

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62A02EVM-197 — 5.5V, 2A 출력, 1% 피드백 정확도 동기 스텝다운 컨버터 평가 모듈

TPS62A02EVM-197 평가 모듈(EVM)은 0.6mm 높이의 1.6mm x 1.6mm SOT563 패키지에 1%의 피드백 정확도와 TPS62A02 2.0A, 스텝다운 컨버터의 평가를 지원합니다. EVM은 2.5V ~ 5.5V 입력 전압을 1.8V의 조정 출력 전압으로 변환합니다. 회로는 최대 높이가 1.2mm이고 37.6mm²를 차지합니다.

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
평가 보드

TPS62A02PEVM-018 — TPS62A02 평가 모듈

TPS62A0xPEVM-018 및 TPS62A0xAPEVM-018은 2.9mm × 2.8mm SOT23-6 패키지의 1A 및 2A, 스텝다운 컨버터의 TPS62A0xP 및 TPS62A0xAP 제품군의 평가를 용이하게 합니다. 이 평가 모듈은 2.5V에서 5.5V 입력 전압으로 변환하여 원하는 출력 전압 조정을 유지합니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS62A02 PSpice Unencrypted Transient Model

SLUM827.ZIP (295 KB) - PSpice Model
패키지 다운로드
SOT-23-THN (DDC) 6 옵션 보기
SOT-5X3 (DRL) 6 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상