전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

TPS63806

활성

소형 WCSP에서 부하 단계 응답을 최적화한 2.5A 고효율 벅 부스트 컨버터

제품 상세 정보

Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.3 Vout (max) (V) 5.2 Vout (min) (V) 1.8 Switch current limit (typ) (A) 5.5 Features Enable, Light-load efficiency, Load Disconnect, Power good, Prebias startup, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000013 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.3 Vout (max) (V) 5.2 Vout (min) (V) 1.8 Switch current limit (typ) (A) 5.5 Features Enable, Light-load efficiency, Load Disconnect, Power good, Prebias startup, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000013 Duty cycle (max) (%) 100
DSBGA (YFF) 15 3.08000000000000022 mm² (— mm × — mm)
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS631000 활성 1.5A 출력 전류, 높은 전력 밀도 벅 부스트 컨버터 TPS631000 is a newer version with 8-uA Iq and smaller SOT package
TPS63901 활성 WCSP 패키지에서 75nA 작동 IQ를 지원하는 5.5V 벅 부스트 컨버터 Ultra low IQ and smaller size

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
17개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS6380x High-Efficiency, Low IQ Buck-Boost Converter with Small Solution Size datasheet (Rev. E) PDF | HTML 2021. 8. 26
애플리케이션 노트 Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. D) 2021. 8. 4
애플리케이션 노트 Supercapacitor Backup Power Supply w/ Current Limit for Smart Electricity Meter (Rev. A) 2021. 8. 3
애플리케이션 노트 Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load Applications (Rev. A) 2021. 7. 26
애플리케이션 노트 A Topical Index of TI Low-Power Buck-Boost Converter Application Notes (Rev. A) PDF | HTML 2021. 6. 9
애플리케이션 노트 Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) PDF | HTML 2021. 6. 9
기술 문서 Is there a universal tool for DC/DC voltage conversion? PDF | HTML 2019. 9. 30
애플리케이션 노트 Improving Load Transient Response for Controlled Loads 2019. 9. 12
애플리케이션 노트 Using Non-Inverting Buck-Boost Converter for Voltage Stabilization 2019. 8. 1
Application brief Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A) 2019. 5. 28
Application brief Buck-Boost Converters Solving Power Challenges in Optical Modules 2019. 5. 13
Application brief Precise Delayed Start-up with Precise Threshold Enable-pin 2019. 4. 15
Application brief Prevent Battery Overdischarge with Precise Threshold Enable Pin 2019. 4. 2
애플리케이션 노트 Selecting the right DC/DC converter for maximum battery life 2019. 2. 8
Application brief Supercapacitor backup power supply with TPS63802 2019. 1. 21
애플리케이션 노트 Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) 2018. 7. 9
애플리케이션 노트 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011. 9. 19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS63806EVM — TPS63806 고전류, 고효율 벅-부스트 컨버터 평가 모듈

TPS63806EVM은 사용자가 TPS63806 벅-부스트 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. EVM은 입력 전압 범위 1.3V~5.5V에서 작동합니다. 출력 전류는 벅 모드와 부스트 모드에서 최대 2A까지 상승할 수 있습니다. 사용자는 정밀 장치 인에이블을 포함하여 TPS63806의 여러 기능을 쉽게 평가할 수 있습니다. TPS63806은 소형 2.3 x 1.4 mm² WCSP 패키지로 제공됩니다.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

Unencrypted TPS63806 PSPICE Model Package (Rev. A)

SLVMD58A.ZIP (75 KB) - PSpice 모델
지원되는 제품 및 하드웨어
계산 툴

SLVC808 — Battery Lifetime Estimator

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-010254 — Sub-1GHz 및 Bluetooth® 5.2 레퍼런스 설계를 지원하는 배터리 전원 mmWave 레이더 센서

이 산업용 레퍼런스 설계는 Sub-1GHz 또는 Bluetooth® 5.2 무선 통신을 지원하는 배터리 구동식 IWRL6432 60GHz mmWave 레이더 사용을 보여줍니다. 이 설계는 리튬 배터리의 인원 수 계산 및 추적, 그리고 동작 추적 애플리케이션이 시연되어 결과를 Sub-1G 또는 Bluetooth에서 원격 호스트로 전송하며 기존 IWRL6432 소프트웨어와 호환됩니다. 이 레퍼런스 설계는 PC GUI를 지원하는 LAUNCHXLCC1352R1 무선 마이크로컨트롤러 LaunchPad™를 사용하여 레이더 센서 데이터와 감지 (...)

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFF) 15 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상