전력 관리 멀티 채널 IC(PMIC)

TPS657095

활성

임베디드 카메라 모듈 PMIC

제품 상세 정보

Product type Camera sensor Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 3.7 Vin (max) (V) 6 Iout (max) (A) 0.1 Configurability Software configurable Features Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.025 Shutdown current (ISD) (typ) (µA) 45
Product type Camera sensor Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 3.7 Vin (max) (V) 6 Iout (max) (A) 0.1 Configurability Software configurable Features Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.025 Shutdown current (ISD) (typ) (µA) 45
DSBGA (YFF) 16 3.24 mm² 1.8 x 1.8
  • Two 100mA LDOs
  • Output Voltage Accuracy ±1.5%
  • VIN Range From 3.7V to 6V
  • LED Driver with PWM Dimming
  • 1 GPO
  • 1 GPIO
  • I2C™ Interface
  • 4KByte User OTP memory
  • Available in 16-Ball DSBGA with 0.4mm Pitch
  • Two 100mA LDOs
  • Output Voltage Accuracy ±1.5%
  • VIN Range From 3.7V to 6V
  • LED Driver with PWM Dimming
  • 1 GPO
  • 1 GPIO
  • I2C™ Interface
  • 4KByte User OTP memory
  • Available in 16-Ball DSBGA with 0.4mm Pitch

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock generator and 4K Byte of User OTP memory. The operation of the device is disabled if the input voltage supply is below the internal undervoltage lockout.

The device comes in a 16-ball die-size ball grid array package (DSBGA) with 0.4mm ball pitch.

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock generator and 4K Byte of User OTP memory. The operation of the device is disabled if the input voltage supply is below the internal undervoltage lockout.

The device comes in a 16-ball die-size ball grid array package (DSBGA) with 0.4mm ball pitch.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TPS657095 PMU for Embedded Camera Module datasheet (Rev. A) PDF | HTML 2016/02/23
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020/08/18
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017/08/09

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS657095EVM-122 — TPS657095 임베디드 카메라용 PMU 평가 모듈

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
평가 모듈(EVM)용 GUI

IPG-UI IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

평가 모듈(EVM)용 GUI

IPG-UI-LINUX IPG-UI EVM GUI (Linux Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

평가 모듈(EVM)용 GUI

IPG-UI-OSX IPG-UI EVM GUI (OSX Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

평가 모듈(EVM)용 GUI

SLVC635 TPS657095 Installer Support Pack for IPG-UI GUI

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시뮬레이션 모델

TPS657095 IBIS MODEL

SLVMBA7.ZIP (72 KB) - IBIS Model
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFF) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상