이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS7A54-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified for Automotive Applications
- Temperature Grade 1: –40°C ≤ TA ≤ +125°C
- HBM ESD Classification Level 2
- CDM ESD Classification Level C4A
- Extended Junction Temperature (TJ) Range: –40°C to +150°C
- Input Voltage Range:
- Without BIAS: 1.4 V to 6.5 V
- With BIAS: 1.1 V to 6.5 V
- Adjustable Output Voltage Range: 0.8 V to 5.1 V
- Low Dropout: 240 mV (max) at 4 A With BIAS
- Output Voltage Noise: 4.4 µVRMS
- 1% (max) Accuracy Over Line, Load, and Temperature With BIAS
- Power-Supply Ripple Rejection:
- 40 dB at 500 kHz
- Adjustable Soft-Start Inrush Control
- Open-Drain, Power-Good (PG) Output
- 3.5-mm × 3.5-mm, 20-Pin VQFN Package
The TPS7A54-Q1 device is a low-noise (4.4 µVRMS), low-dropout linear regulator (LDO) capable of sourcing 4 A with only 240 mV of maximum dropout. The device output voltage is adjustable from 0.8 V to 5.1 V using an external resistor divider.
The combination of low-noise (4.4 µVRMS), high-PSRR, and high output current capability makes the TPS7A54-Q1 ideal to power noise-sensitive components such as those found in radar power and infotainment applications. The high performance of this device limits power-supply-generated phase noise and clock jitter, making this device ideal for powering RF amplifiers, radar sensors, and chipsets. Specifically, RF amplifiers benefit from the high-performance and 5.0-V output capability of the device.
For digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input voltage, low-output (LILO) voltage operation, the exceptional accuracy (1% over load and temperature), remote sensing, excellent transient performance, and soft-start capabilities of the TPS7A54-Q1 provides optimal system performance.
The versatility of the TPS7A54-Q1 makes the device a component of choice for many demanding applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7A54-Q1 4-A, High-Accuracy, Automotive-Grade, Low-Noise, LDO Voltage Regulator datasheet (Rev. A) | PDF | HTML | 2018. 2. 28 | ||
| 백서 | Reduce System Noise Using Parallel LDOs | PDF | HTML | 2025. 11. 3 | |||
| 백서 | Parallel LDO Architecture Design Using Ballast Resistors | PDF | HTML | 2022. 12. 14 | |||
| 백서 | Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast | PDF | HTML | 2022. 12. 13 | |||
| 기능 안전 정보 | TPS7A54-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2022. 9. 23 | |||
| 추가 자료 | Fundamentals of designing with LDOs in auto battery direct connect applications | 2017. 2. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7A54EVM-006 — TPS7A54-Q1 4A 낮은 VIN(1.1V) 저잡음 고정밀 울트라 LDO 전압 레귤레이터 평가 모듈
TPS7A54EVM-006 EVM(평가 모듈)은 자동차 등급 4A LDO(저손실) 전압 레귤레이터인 TPS7A54-Q1 장치의 작동과 성능을 평가하는 일반적인 구성을 위해 설계되었습니다.
EVM 회로 보드는 최대 4A의 동적 부하까지 전류가 필요한 엔지니어링 애플리케이션을 위한 레퍼런스 설계로 구성되어 있습니다.
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
병렬 저손실(LDO) 계산기는 밸러스트 저항을 사용하여 병렬 LDO 레귤레이터에 대한 최악의 분석을 제공하는 Microsoft® Excel® 기반 툴입니다. 이 툴은 사용자가 시스템 요구 사항 세트에 필요한 병렬 LDO 레귤레이터의 최소 수와 최적의 밸러스트 저항을 식별하는 데 도움이 됩니다.
병렬 애플리케이션에 사용되는 일반적인 LDO 레귤레이터에 대한 데이터 시트 정보는 계산기에 미리 채워져 있습니다. 사용자는 시스템 요구 사항을 기반으로 시스템 요구 사항에 가장 잘 맞는 LDO 레귤레이터 디바이스를 평가할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGR) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.