TPS7B63-Q1
- AEC-Q100 qualified for automotive
applications:
- Temperature grade 1: –40°C to 125°C, TA
- Maximum output current: 300mA
- 4V to 40V wide VIN input-voltage range with up to 45V transients
- Fixed 3.3V and 5V outputs
- Maximum dropout voltage: 400mV at 300mA
- Stable with output capacitor in wide range of capacitance (4.7µF to 500µF) and ESR (0.001Ω to 20Ω)
- Low quiescent current
(I(Q)):
- < 4µA when EN is low (shutdown mode)
- 19µA typical at light loads with WD_EN high (watchdog disabled)
- Configurable for window watchdog or standard watchdog
- Open-to-closed window ratio configurable as 1:1 or 8:1
- Fully adjustable watchdog period (from 10ms to 500ms)
- 10% accurate watchdog period
- Dedicated WD_EN pin to control watchdog ON-OFF
- Fully adjustable power-good threshold and power-good delay period
- Low input-voltage tracking to UVLO
- Integrated fault protection
- Overload current-limit protection
- Thermal shutdown
-
Functional Safety-Capable
- Documentation available to aid functional safety system design
- 16-pin HTSSOP package
In automotive microcontroller or microprocessor power-supply applications, the watchdog is used to monitor the microcontroller working status to prevent software runaway. The watchdog must be independent of the microcontroller in a reliable system.
The TPS7B63-Q1 is a 300mA watchdog low-dropout regulator (LDO) designed for an operating voltage up to 40V, with typical quiescent current of only 19µA at light load. The device integrates a programmable function for selecting a window watchdog or standard watchdog, with an external resistor to set the watchdog time within 10% accuracy.
The PG pin on the TPS7B63-Q1 indicates when the output voltage is stable and in regulation. The power-good delay period and power-good threshold can be adjusted by selecting external components. The device also features integrated short-circuit and overcurrent protection. The combination of such features makes this device particularly flexible and designed to supply a microcontroller in automotive applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7B63-Q1 Automotive, 300mA, 40V High-Voltage, Ultra-Low-Quiescent-Current Watchdog LDO datasheet (Rev. D) | PDF | HTML | 2025. 6. 6 | |
| 애플리케이션 노트 | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025. 9. 23 | ||
| 기능 안전 정보 | TPS7B63-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) | 2020. 6. 10 | |||
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 | |||
| e북 | LDO Basics (Rev. A) | 2019. 4. 8 | |||
| 기술 문서 | Discrete SBCs: versatile and scalable solutions for any application | PDF | HTML | 2017. 7. 27 | ||
| 기술 문서 | LDO basics: dropout | PDF | HTML | 2017. 3. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7B6350EVM — TPS7B6350-Q1 300mA 워치독 LDO 레귤레이터 평가 모듈
TPS7B6350EVM 평가 모듈(EVM)을 사용하면 TPS7B6350-Q1 워치독 LDO(저손실) 레귤레이터의 작동 및 성능을 평가할 수 있습니다. TPS7B6350-Q1은 16핀 HTSSOP 패키지에 들어 있는 모놀리식 통합 40V 300mA 워치독 LDO 레귤레이터입니다. 이 장치는 차량 환경에서 마이크로컨트롤러 또는 마이크로프로세서 전원 공급 장치용으로 설계되었습니다. 이 장치에는 과부하 보호 기능, 과열 보호 기능, 통합 조정 가능한 전원 양호 임계값 및 지연 시간 기능이 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.