TPS7H1111-SP
-
Total
ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) availability of 100 krad(Si) or 50 krad(Si)
-
Single-Event Effects (SEE)
characterized
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75 MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75 MeV-cm2/mg
- Ultra-low noise (10 Hz to 100 kHz):
- 1.71 µVRMS (typ)
- High power-supply rejection ratio, PSRR
(typ):
- 109 dB at 1 kHz
- 71 dB at 100 kHz
- 66 dB at 1 MHz
- Input voltage range from 0.85 V to 7 V
- Bias supply of 2.2 V to 14 V to minimize power dissipation
- Output voltage as low as 0.4 V
- Up to 1.5-A output current
- Excellent output accuracy over line and load:
- –1.3% to +1.2% across temperature
- –0.7% to +0.9% at 25°C
- Low-dropout: 215 mV (typ) at 1.5 A
- Programmable soft-start control (SS_SET)
- Open-drain power good (PG) indicator
- Configurable power good threshold (FB_PG)
- Exposed control loop with the external compensation STAB pin
- Internal current limit with configurable behavior
- Current sharing to allow operation of up to 2.9 A
- Military temperature range (–55°C to 125°C)
The TPS7H1111 is an ultra-low noise, high PSRR, low dropout linear regulator (LDO) optimized for powering radio-frequency (RF) devices in a space environment. It is capable of sourcing up to 1.5 A over a 0.85-V to 7-V input range with a 2.2-V to 14-V bias supply.
The high performance of the device limits power-supply generated phase noise and clock jitter, making this device ideal for powering high-performance ADCs, DACs, VCOs, PLLs, SerDes, and other RF components in satellites. For digital loads (such as FPGAs and DSPs) requiring low voltage operation, the exceptional accuracy and excellent transient performance ensure optimal system performance.
A standard microcircuit drawing (SMD) is available for the QML variants, 5962R21203. A vendor item drawing (VID) is available for the -SEP variant, V62/23602.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7H1111EVM-CVAL — 초고 PSRR을 지원하는 1.5A 초저잡음 RF LDO 레귤레이터용 TPS7H1111-SP 평가 모듈
TPS7H1111EVM-CVAL 평가 모듈(EVM)은 저손실(LDO) 선형 레귤레이터인 RHA(방사선 경도 보장) TPS7H1111-SP에 대한 엔지니어링 데모입니다.
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
병렬 저손실(LDO) 계산기는 밸러스트 저항을 사용하여 병렬 LDO 레귤레이터에 대한 최악의 분석을 제공하는 Microsoft® Excel® 기반 툴입니다. 이 툴은 사용자가 시스템 요구 사항 세트에 필요한 병렬 LDO 레귤레이터의 최소 수와 최적의 밸러스트 저항을 식별하는 데 도움이 됩니다.
병렬 애플리케이션에 사용되는 일반적인 LDO 레귤레이터에 대한 데이터 시트 정보는 계산기에 미리 채워져 있습니다. 사용자는 시스템 요구 사항을 기반으로 시스템 요구 사항에 가장 잘 맞는 LDO 레귤레이터 디바이스를 평가할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
| CFP (HBL) | 14 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.