TPS92761-Q1
- AEC-Q100 qualified for automotive applications
- Grade 1: -40°C to 125°C ambient operating temperature
- Functional safety targeted
- Developed for functional safety applications
- Documentation to aid ISO26262 system design up to ASIL B
- 24 constant current sinks with high precision:
- 20V maximum voltage capability
- Up to 90mA channel current set by resistor
- Low dropout voltage: 400mV (typ) at 90mA
- Flexible dimming control:
- 6-bit independent current setting
- 14-bit independent PWM dimming with phase-shift control
- Programmable slew-rate control
- Integrated synchronous buck
regulator
- Wide input voltage range: 5V to 36V
- Supports 400kHz and 2.1MHz switching frequency
- Spread spectrum frequency modulation
- Dynamic headroom voltage control (DHC)
- UART serial communication
- Support for up to 2MHz clock frequency
- Internal oscillator for system clock
- CAN transceiver compatible
- Internal EEPROM
- Failsafe default settings
- Customer calibration data
- Extensive fault diagnostics
The TPS92761-Q1 is a 24 channel device with an integrated synchronous Buck regulator and protected linear current sinks. The device is capable of driving current up to 90mA through LEDs with channel-to-channel accuracy of less than ±3.5%. Each linear current sink can be individually programmed by a 6-bit current setting value and is independently controlled by pulse width modulation (PWM) using 14-bit registers. Transient behavior is improved by programming uniform phase shifted PWM signals between operating channels.
The LEDs can be powered by the voltage rail generated using the wide 5V to 36V input voltage range integrated synchronous Buck regulator. The buck regulator implements an adaptive off-time current mode control enabling low input voltage operation. The device is capable of providing 2.68A current at 2.1MHz switching frequency and 4A current at 400kHz switching frequency with fast transient response. Dynamic headroom control is implemented to optimize system efficiency and reduce thermal dissipation.
The TPS92761-Q1 features an internal oscillator that supports multidrop, universal asynchronous receiver transmitter (UART) serial interface. The internal EEPROM can store system defaults as well as calibration and lighting module data. An on-board ADC with multiplexed inputs samples all LED channels as well as IC die temperature and supply voltages.
추가 정보 요청
전체 데이터시트 및 기타 정보가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS92761-Q1 Automotive Constant Voltage Buck with 24-Channel Linear LED Driver datasheet | PDF | HTML | 2026. 6. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS92761EVM — TPS92761 평가 모듈
TPS92761-Q1은 통합 동기식 벅 레귤레이터 및 보호 기능을 갖춘 선형 전류 싱크를 내장한 24채널 장치입니다. 이 장치는 채널 간 정확도 ±3.5% 이내로 LED를 통해 최대 90mA의 전류를 구동할 수 있습니다. 각 선형 전류 싱크는 6비트 전류 설정 값으로 개별적으로 프로그래밍할 수 있으며, 14비트 레지스터를 사용하는 PWM(펄스 폭 변조)에 의해 독립적으로 제어됩니다. 작동 중인 채널 간에 균일 위상 변이 PWM 신호를 프로그래밍함으로써 과도 응답 특성을 개선합니다.
TPS9276X-CODE-EXAMPLE — Code examples for TPS9276x
TPS9276X-DESIGN — TPS9276X design resources
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PHP) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.