UC1856-SP
- Pin-for-Pin Compatible With the UC1846
- 65-ns Typical Delay From Shutdown to Outputs,
and 50-ns Typical Delay From SYNC to Outputs - Improved Current-Sense Amplifier With
Reduced Noise Sensitivity - Differential Current Sense with 3-V Common-Mode Range
- Trimmed-Oscillator Discharge Current for Accurate
Deadband Control - Accurate 1-V Shutdown Threshold
- High-Current Dual Totem-Pole Outputs (1.5-A peak)
- TTL Compatible Oscillator SYNC Pin Thresholds
- 4-kV ESD Protection
The UC1856 is a high-performance version of the popular UC1846 series of current-mode controllers, and is intended for both design upgrades and new applications where speed and accuracy are important. All input-to-output delays have been minimized, and the current sense output is slew-rate limited to reduce noise sensitivity. Fast 1.5-A peak output stages have been added to allow rapid switching of power FETs.
A low-impedance TTL-compatible sync output has been implemented with a TRI-STATE function when used as a sync input.
Internal-chip grounding has been improved to minimize internal noise caused when driving large capacitive loads. This improvement, in conjunction with the improved differential current-sense amplifier, results in enhanced noise immunity.
Other features include a trimmed oscillator current (8%) for accurate frequency and dead-time control; a 1-V 5% shutdown threshold; and 4-kV minimum electrostatic discharge (ESD) protection on all pins.
Limited design support from TI available
Existing projects using this product have limited design support from TI. If available, you will find relevant collateral, tools and software on this page. Existing designs using this product have limited design support from TI. Request limited design support in the TI E2E™ support forums.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| CDIP (J) | 16 | Ultra Librarian |
| CFP (HKT) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.