전원 관리 DC/DC 전력 모듈 절연 전원 모듈(일체형 변압기)

UCC12051-Q1

활성

차량용, 500mW, 5kVrms 절연 DC/DC 모듈 - 변압기 내장

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 UCC33421-Q1 미리 보기 통합 변압기를 지원하는 오토모티브, 5V/5V 1.5W 5kVrms 절연 DC-DC 전원 모듈 Smaller footprint, increased power and efficiency.

제품 상세 정보

Features 0.5W, Regulated, Reinforced isolation, Single output Output power (W) 0.5 Vin (min) (V) 4.5 Vin (max) (V) 5.5 Vout (max) (V) 5 Device type Isolated modules Isolation rating Reinforced Regulated outputs (#) 1 Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Full-bridge Control mode Internally Regulated with 3.3V or 5V Select Vout (min) (V) 3.3
Features 0.5W, Regulated, Reinforced isolation, Single output Output power (W) 0.5 Vin (min) (V) 4.5 Vin (max) (V) 5.5 Vout (max) (V) 5 Device type Isolated modules Isolation rating Reinforced Regulated outputs (#) 1 Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Full-bridge Control mode Internally Regulated with 3.3V or 5V Select Vout (min) (V) 3.3
SO-MOD (DVE) 16 106.09 mm² 10.3 x 10.3
  • High-efficiency DC/DC converter with integrated transformer technology
  • AEC-Q100 qualified with the following results:
    • Device temperature Grade 1: –40°C to 125°C ambient operating Temperature
  • Functional Safety-Capable
  • Output power (typical): 500 mW
  • Regulated 5 V or 3.3 V output with selectable 400 mV headroom voltage to power an LDO
  • Input voltage: 4.5 V to 5.5 V
  • Robust isolation barrier:
    • Isolation rating: 5 kVRMS
    • Surge capability: 10 kVPK
    • Working voltage: 1.2 kVRMS
    • Minimum CMTI: 100 V/ns
  • Short circuit recovery
  • Thermal shutdown
  • 16-pin wide-body SOIC package with > 8-mm creepage and clearance
  • Safety-related certifications (planned):
    • 7071-VPK reinforced isolation per DIN V VDE V 0884-11:2017-01
    • 5000-VRMS isolation for 1 minute per UL 1577
    • UL certification per IEC 60950-1 and IEC 62368-1 end equipment standards
    • CQC approval per GB4943.1-2011
  • High-efficiency DC/DC converter with integrated transformer technology
  • AEC-Q100 qualified with the following results:
    • Device temperature Grade 1: –40°C to 125°C ambient operating Temperature
  • Functional Safety-Capable
  • Output power (typical): 500 mW
  • Regulated 5 V or 3.3 V output with selectable 400 mV headroom voltage to power an LDO
  • Input voltage: 4.5 V to 5.5 V
  • Robust isolation barrier:
    • Isolation rating: 5 kVRMS
    • Surge capability: 10 kVPK
    • Working voltage: 1.2 kVRMS
    • Minimum CMTI: 100 V/ns
  • Short circuit recovery
  • Thermal shutdown
  • 16-pin wide-body SOIC package with > 8-mm creepage and clearance
  • Safety-related certifications (planned):
    • 7071-VPK reinforced isolation per DIN V VDE V 0884-11:2017-01
    • 5000-VRMS isolation for 1 minute per UL 1577
    • UL certification per IEC 60950-1 and IEC 62368-1 end equipment standards
    • CQC approval per GB4943.1-2011

UCC12051-Q1 is an automotive qualified DC/DC power module with 5-kVRMS isolation rating designed to provide efficient, isolated power to isolated circuits that require a bias supply with a well-regulated output voltage. The device integrates a transformer and DC/DC controller with a proprietary architecture to provide 500 mW (typical) of isolated power with low EMI.

The UCC12051-Q1 integrates protection features for increased system robustness. The device also has an enable pin, synchronization capability, and regulated 5-V or 3.3-V output options with headroom. The UCC12051-Q1 is a low-profile, miniaturized solution offered in a wide-body SOIC package with 2.65-mm height (typical).

UCC12051-Q1 is an automotive qualified DC/DC power module with 5-kVRMS isolation rating designed to provide efficient, isolated power to isolated circuits that require a bias supply with a well-regulated output voltage. The device integrates a transformer and DC/DC controller with a proprietary architecture to provide 500 mW (typical) of isolated power with low EMI.

The UCC12051-Q1 integrates protection features for increased system robustness. The device also has an enable pin, synchronization capability, and regulated 5-V or 3.3-V output options with headroom. The UCC12051-Q1 is a low-profile, miniaturized solution offered in a wide-body SOIC package with 2.65-mm height (typical).

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
UCC12041-Q1 활성 통합 변압기를 지원하는 차량용, 500mW, 3kVrms 절연 DC/DC 모듈 With basic isolation
UCC12050 활성 500mW, 고효율, 5kVRMS 절연 DC/DC 컨버터 Commercial grade

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
19개 모두 보기
유형 직함 날짜
* Data sheet UCC12051-Q1 High-Efficiency, Low-EMI, 5-kVRMS Isolation DC/DC Converter datasheet (Rev. A) PDF | HTML 2021/06/23
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. W) 2025/03/04
Certificate UCC120xx UL Certificate of Compliance 2025/01/07
Certificate UCC12050, UCC12051-Q1 CQC Certificate of Compliance to GB4943.1-2022 CQC20001273822 2024/08/16
Certificate UCC12050, UCC12051-Q1, CQC Certificate of Compliance to GB4943.1-2022 CQC20001273822 2024/08/16
White paper 신뢰할 수 있는 합리적 가격대의 절연 기술 개발과 관련한 고전압 설계 문제의 해결 (Rev. C) PDF | HTML 2024/05/16
Technical article 인터리브 접지면을 사용하여 절연 전원 공급 장치의 잡음 필터링 개선 PDF | HTML 2024/03/21
Certificate UL Certificate of Compliance to IEC 60950-1 US-36707-A1-UL (UCC12051-Q1) 2022/12/13
Certificate UL Certificate of Compliance to IEC 62368-1 US-36706-A1-UL (UCC12051-Q1) 2022/12/13
Certificate UL Certificate of Compliance to UL1577 File No E181974 (UCC12051-Q1) 2022/12/13
Certificate UL Certificate of Compliance to IEC 60601-1 US-36773-M1-UL (UCC12051-Q1) 2022/12/12
Certificate CQC Certificate of Compliance to GB4943.1-2011 CQC20001273822 (UCC12051-Q1) 2022/12/12
Certificate UCC120151-Q1 CQC Certificate of Compliance to GB4943.1-2011 CQC20001273822 (EN) 2022/12/12
User guide UCC12050EVM-022 User's Guide (Rev. D) PDF | HTML 2022/01/26
Test report UCC12051-Q1 CISPR 25 FCC Report 2.0 (Rev. A) 2021/05/25
Functional safety information UCC12051-Q1, UCC12041-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2021/05/03
Certificate UCC12051Q1 CISPR25 Certificate of Compliance PR135773 2021/04/08
More literature A simple, robust, and low-EMI solution for inverter gate-driver bias supplies 2021/03/23
Technical article The value of a thin, isolated power solution PDF | HTML 2021/02/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC12050EVM-022 — UCC12050DVE 절연 DC-DC 컨버터 평가 모듈

UCC12050EVM-022는 설계자가 UCC12050DVE의 성능과 기능을 평가할 수 있도록 고안되었습니다. 이 EVM을 사용하면 활성화/비활성화, 장치를 외부 클록 소스와 동기화, 외부 클록 오류 감지, 사용 가능한 출력 전압 중에서 선택과 같은 UCC12050DVE의 기능을 테스트할 수 있습니다.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

UCC12051-Q1 SIMPLIS Model

SNVMC55.ZIP (84 KB) - SIMPLIS Model
레퍼런스 디자인

PMP22845 — 차량용 CISPR 25, 클래스 5 배출용 절연 5V 바이어스 전원 레퍼런스 디자인

이 레퍼런스 설계는 차량용, CIPSR 25, 클래스 5, EMC 테스트 표준을 통과하기 위해 고주파, 강화 5kVRMS 절연, 5V 바이어스 DC/DC 컨버터 모듈에 필요한 EMI 완화 기법을 보여줍니다. 이 설계는 2.65mm 높이 SOIC-16 패키지 솔루션에 변압기, 제어 및 전력계가 통합된 500mW 고효율 바이어스 전원을 제공합니다.  일반적인 바이어스 예로는 트랙션 인버터, 온 보드 충전기, 배터리 관리 시스템, 인포테인먼트, 충전 케이블 및 PTC 히터의 설계에 사용되는 디지털 아이솔레이터, 전압 및 전류 센싱, (...)
사용 설명서: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SO-MOD (DVE) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상