UCC27710

활성

인터로크를 갖춘 0.5A/1.0A, 620V 하프 브리지 게이트 드라이버

지금 주문하기

데이터 시트

document-pdfAcrobat UCC27710 620-V, 0.5-A, 1.0-A High-Side Low-Side Gate Driver with Interlock datasheet (Rev. B) (영어) PDF | HTML

UCC27710

활성

데이터 시트

지금 주문하기

제품 상세 정보

Bootstrap supply voltage (max) (V)

700

Power switch

IGBT, MOSFET

Input supply voltage (min) (V)

Input supply voltage (max) (V)

Peak output current (A)

Operating temperature range (°C)

-40 to 150

Undervoltage lockout (typ) (V)

Rating

Catalog

Propagation delay time (µs)

0.14

Rise time (ns)

Fall time (ns)

Iq (mA)

0.25

Input threshold

CMOS, TTL

Channel input logic

Noninverting

Switch node voltage (V)

-11

Features

Dead time control, Interlock

Driver configuration

CMOS compatible, Dual, Noninverting, TTL compatible

Bootstrap supply voltage (max) (V)

700

Power switch

IGBT, MOSFET

Input supply voltage (min) (V)

Input supply voltage (max) (V)

Peak output current (A)

Operating temperature range (°C)

-40 to 150

Undervoltage lockout (typ) (V)

Rating

Catalog

Propagation delay time (µs)

0.14

Rise time (ns)

Fall time (ns)

Iq (mA)

0.25

Input threshold

CMOS, TTL

Channel input logic

Noninverting

Switch node voltage (V)

-11

Features

Dead time control, Interlock

Driver configuration

CMOS compatible, Dual, Noninverting, TTL compatible

SOIC (D)

29.4 mm² (4.9 mm × 6 mm)

High-Side and Low-Side Configuration
Dual Inputs With Output Interlock and 150-ns Deadtime
Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin
10-V to 20-V VDD Recommended Range
Peak Output Current 0.5-A Source, 1.0-A Sink
dv/dt Immunity of 50 V/ns
Logic Operational up to –11 V on HS Pin
Negative Voltage Tolerance On Inputs of –5 V
Large Negative Transient Safe Operating Area
UVLO Protection for Both Channels
Small Propagation Delay (140 ns Typical)
Delay Matching (8 ns Typical)
Floating Channel Designed for Bootstrap Operation
Low Quiescent Current
TTL and CMOS Compatible Inputs
Industry Standard SOIC-8 Package
All Parameters Specified Over Temperature Range, –40 °C to +125 °C

High-Side and Low-Side Configuration
Dual Inputs With Output Interlock and 150-ns Deadtime
Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin
10-V to 20-V VDD Recommended Range
Peak Output Current 0.5-A Source, 1.0-A Sink
dv/dt Immunity of 50 V/ns
Logic Operational up to –11 V on HS Pin
Negative Voltage Tolerance On Inputs of –5 V
Large Negative Transient Safe Operating Area
UVLO Protection for Both Channels
Small Propagation Delay (140 ns Typical)
Delay Matching (8 ns Typical)
Floating Channel Designed for Bootstrap Operation
Low Quiescent Current
TTL and CMOS Compatible Inputs
Industry Standard SOIC-8 Package
All Parameters Specified Over Temperature Range, –40 °C to +125 °C

The UCC27710 is a 620-V high-side and low-side gate driver with 0.5-A source, 1.0-A sink current, targeted to drive power MOSFETs or IGBTs.

The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.

The UCC27710 includes protection features where the outputs are held low when the inputs are left open or when the minimum input pulse width specification is not met. Interlock and deadtime functions prevent both outputs from being turned on simultaneously. In addition, the device accepts a wide range bias supply range from 10 V to 20 V, and offers UVLO protection for both the VDD and HB bias supply.

Developed with TI’s state of the art high-voltage device technology, the device features robust drive with excellent noise and transient immunity including large negative voltage tolerance on its inputs, high dV/dt tolerance, wide negative transient safe operating area (NTSOA) on the switch node (HS), and interlock.

The device consists of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap or isolated power supplies. The device features fast propagation delays and excellent delay matching between both channels. On the UCC27710, each channel is controlled by its respective input pins, HI and LI.

The UCC27710 is a 620-V high-side and low-side gate driver with 0.5-A source, 1.0-A sink current, targeted to drive power MOSFETs or IGBTs.

The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.

filter

기타 하프 브리지 드라이버 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new

대안 비교

비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.

LM2101

활성

8V UVLO를 지원하는 107V, 0.5A/0.8A 하프브리지 게이트 드라이버 More recent pin-to-pin device with lower voltage rating

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

17개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	데이터 시트	UCC27710 620-V, 0.5-A, 1.0-A High-Side Low-Side Gate Driver with Interlock datasheet (Rev. B)	PDF \| HTML	2018. 8. 30
	애플리케이션 노트	External vs. Internal Bootstrap Diode: Tradeoffs and Considerations	PDF \| HTML	2026. 1. 5
	애플리케이션 노트	Selecting Gate Drivers for HVAC Systems (Rev. A)	PDF \| HTML	2025. 11. 7
	애플리케이션 노트	Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET	PDF \| HTML	2024. 3. 25
	애플리케이션 노트	Review of Different Power Factor Correction (PFC) Topologies' Gate Driver Needs	PDF \| HTML	2024. 1. 22
	애플리케이션 노트	How to Choose a Gate Driver for DC Motor Drives	PDF \| HTML	2023. 10. 5
	애플리케이션 노트	Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A)	PDF \| HTML	2023. 9. 8
	애플리케이션 노트	Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A)	PDF \| HTML	2022. 2. 17
	애플리케이션 노트	Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. D)		2021. 4. 7
	추가 자료	Troubleshooting gate drive circuits in automotive and industrial applications		2021. 3. 23
	애플리케이션 노트	Implementing High-Side Switches Using Half-Bridge Gate Drivers for 48-V Battery.		2020. 5. 12
	Application brief	External Gate Resistor Selection Guide (Rev. A)		2020. 2. 28
	Application brief	Understanding Peak IOH and IOL Currents (Rev. A)		2020. 2. 28
	추가 자료	Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A)		2018. 10. 29
	기술 문서	How to achieve higher system robustness in DC drives, part 3: minimum input pulse	PDF \| HTML	2018. 9. 19
	기술 문서	How to achieve higher system robustness in DC drives, part 2: interlock and deadti	PDF \| HTML	2018. 5. 30
	기술 문서	How to achieve higher system robustness in DC drives, part 1: negative voltage	PDF \| HTML	2018. 4. 17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC27710EVM-005 — UCC27710 620V, 0.5A, 1.0A 고압측 저압측 게이트 드라이버 평가 모듈

UCC27710EVM-005은 적절한 소스 및 싱크 피크 전류 기능을 지원하는 620V 하프 브리지 게이트 드라이버인 UCC27710D를 평가하기 위해 설계되었습니다. 이 EVM은 데이터 시트를 기준으로 드라이버 IC를 평가하는 데 사용할 수 있습니다. EVM은 드라이버 IC 구성 요소 선택 가이드로 사용할 수도 있습니다. EVM을 사용하여 게이트 드라이버 성능에 대한 PCB 레이아웃의 영향을 확인할 수 있습니다.

사용 설명서: PDF

지원되는 제품 및 하드웨어

재고 있음

제한:

주문하려면 로그인

lock

재고를 보려면 로그인

??asset.out-of-stock-ti_ko_KR??

이용할 수 없음

시뮬레이션 모델