AM5708
- Arm® Cortex®-A15 microprocessor subsystem
- C66x floating-point VLIW DSP
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
- Up to 512KB of on-chip L3 RAM
- Level 3 (L3) and Level 4 (L4) interconnects
- DDR3/DDR3L Memory Interface (EMIF)
module
- Supports up to DDR-1333 (667 MHz)
- Up to 2GB across single chip select
- 2x dual Arm® Cortex®-M4 co-processors (IPU1 and IPU2)
- IVA-HD subsystem
- 4K @ 15fps encode and decode support for H.264 CODEC
- Other CODECs are up to 1080p60
- Display subsystem
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video input and video output
- 2D and 3D graphics
- Display controller with DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- 2x dual-core programmable real-time unit and industrial communication subsystem (PRU-ICSS)
- Accelerator (BB2D)
subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- Available single-core PowerVR™ SGX544 3D GPU
- Secure boot support
- Hardware-enforced root-of-trust
- Customer programmable keys
- Support for takeover protection, IP protection, and anti-roll back protection
- Cryptographic acceleration
support
- Supports cryptographic cores
- AES – 128/192/256-bits key sizes
- 3DES – 56/112/168-bits key sizes
- MD5, SHA1
- SHA2 – 224/256/384/512
- True random number generator
- DMA support
- Supports cryptographic cores
- Debug
security
- Secure software controlled debug access
- Security aware debugging
- Trusted execution environment (TEE)
support
- Arm TrustZone™ based TEE
- Extensive firewall support for isolation
- Secure DMA path and interconnect
- Secure watchdog/timer/IPC
- One Video
Input Port (VIP) module
- Support for up to four multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) controller
- Ethernet subsystem
- Sixteen 32-bit general-purpose timers
- 32-bit MPU watchdog timer
- Five high-speed inter-integrated circuit (I2C) ports
- HDQ™/1-wire® interface
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad SPI Interface (QSPI)
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- High-Speed USB 2.0 dual-role device
- Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC™/SD®/SDIO)
- PCI Express®
3.0 subsystem with 5-Gbps lane
- One 2-lane Gen2-compliant port
- or two 1-lane Gen2-compliant ports
- Dual Controller Area Network (DCAN)
modules
- CAN 2.0B protocol
- MIPI™ CSI-2 camera serial interface
- Up to 186 General-Purpose I/O (GPIO) pins
- Power, reset, and clock management
- On-chip debug with CTools technology
- 28-nm CMOS technology
- 17 mm × 17 mm, 0.65-mm pitch, 538-pin BGA (CBD)
AM570x Sitara™ processors are Arm applications processors built to meet the intense processing needs of modern embedded products.
AM570x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
Programmability is provided by a single-core Arm Cortex-A15 RISC CPU with Arm Neon™ extensions and TI C66x VLIW floating-point DSP cores. The Arm processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
AM570x Sitara™ processors are Arm applications processors built to meet the intense processing needs of modern embedded products.
AM570x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
Programmability is provided by a single-core Arm Cortex-A15 RISC CPU with Neon extensions and TI C66x VLIW floating-point DSP cores. The Arm processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
特別說明
填寫要求以取得有關 AM570xS 安全啟動裝置的更多資訊、購買高度安全 EVM,以及取得 SEC-DEV 軟體。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMDXIDK5718 — AM571x 工業開發套件 (IDK)
TMDXIDK5718:AM571x 工業開發套件 (IDK) 支援採用 Cortex A-15 單核心的 AM57x,針對工業應用設計。
- 同時支援 6 連接埠乙太網路,2xRGMII 和 4xMII
- 整合工業乙太網路與現場總線通訊協定,可同時進行主要/從屬、主要/主要或從屬/從屬運作
- 提供 PCIe 與 GPMC 擴充埠,以實現快速平行外部介面
- 附帶相機子卡,支援機器視覺應用
- 可選配 10 吋電容式觸控螢幕,實現可擴展的人機介面應用
- 支援低延遲決定性 TI-RTOS 與 RT-Linux 的 HLOS。還提供其他合作夥伴作業系統的支援。
ADVAN-3P-SITARA-SOMS — Advantech Sitara SOM 和 SBCS
BEAGLEBOARD-X15 — BeagleBoard-X15 開發電路板
COMPU-3P-SITARASOMS — Compulab Sitara SOM
CRLNK-3P-SOMS — 適用於 TI ARM 架構處理器的 Critical Link MitySOM 系統模組
Critical Link is a US-based embedded systems company offering System on Modules (SoMs) and scientific imaging platforms for electronic applications around the world. The MitySOM® and MityDSP® families incorporate DSP, FPGA, and ARM technologies, and are designed for long product lifespan and (...)
ELESAR-3P-SITARA-SOMS — Elesar Sitara SOM
FORLX-3P-SITARA-SOMS — Forlinx Sitara SOM
TQ-3P-SITARASOMS — 適用於 TI Arm 架構處理器和微控制器的 TQ Group 系統模組
TMDSEMU110-U — XDS110 JTAG 偵錯探測器
德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別,適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列,可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時,所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。 對於針腳上的核心追蹤,則需要 XDS560v2 PRO TRACE。
德州儀器 XDS110 透過 TI 20 針腳連接器(具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器)連接到目標電路板,並透過 USB2.0 (...)
PROCESSOR-SDK-LINUX-AM57X — Linux Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
PROCESSOR-SDK-LINUX-RT-AM57X — Linux-RT Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
PROCESSOR-SDK-RTOS-AM57X — RTOS Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
MG-3P-NUCLEUS-RTOS — Mentor Graphics Nucleus RTOS
QNX-3P-NEUTRINO-RTOS — QNX Neutrino RTOS
FFTLIB — 適用於浮點裝置的 FFT 函式庫
The Texas Instruments FFT library is an optimized floating-point math function library for computing the discrete Fourier transform (DFT).
MATHLIB — 用於浮點裝置的 DSP 數學函式庫
PRU-ICSS-INDUSTRIAL-SW — 適用於 Sitara™ 處理器的 PRU-ICSS 工業軟體
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
SPRC264 — TMS320C5000/6000 映像庫 (IMGLIB)
C5000 6000 影像處理庫 (IMGLIB) 是適合 C 程式設計工具的最佳化影像/影片處理函式庫。此函式庫包括 C 可呼叫通用影像/影片處理常式,這些常式通常用於運算密集型即時應用。相較於同等標準 ANSI C 語言程式碼,使用這些常式可以實現更高性能。IMGLIB 透過立即可用的 DSP 功能與原始程式碼,能夠大幅縮短應用程式開發時間。
查看基準測試:DSP 核心基準測試
SPRC265 — TMS320C6000 DSP 函式庫 (DSPLIB)
TMS320C6000 數位訊號處理器函式庫 (DSPLIB) 是適合 C 編程人員的平台最佳化 DSP 函式庫。此函式庫包括可呼叫 C 語言的通用訊號處理常式,通常用於運算密集的即時應用。相較於同等標準 ANSI C 語言程式碼,使用這些常式可以實現更高性能。DSPLIB 透過立即可用的 DSP 功能與原始程式碼,能夠大幅縮短應用程式開發時間。
查看基準測試:DSP 核心基準測試
WIT-3P-SITARABSP — Witekio Sitara Android 和 Windows 作業系統
C66XCODECS — 轉碼器 - 視訊、語音 - 適用於 C66x 架構產品
TI codecs are free, come with production licensing and are available for download now. All are production-tested for easy integration into video and voice applications. In many cases, the C64x+ codecs are provided and validated for C66x platforms. Datasheets and Release Notes are on the download (...)
ITTIAM-3P-CODECS — Ittiam 轉碼器
Ittiam provides high quality, high performance multimedia centric products and solutions. Ittiam brings extensive media expertise and more than a decade's experience on Texas Instruments processors. Leverage Ittiam’s rich portfolio of proven, high-performance audio codecs to build an array of (...)
CLOCKTREETOOL — 適用於 Sitara、車用、視覺分析和數位訊號處理器的時脈樹工具
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
POWEREST — 功率估計工具 (PET)
功耗估算工具 (PET) 讓使用者能深入瞭解特定 TI 處理器的功耗情況。本工具允許使用者選擇多種應用場景,不僅能掌握功耗數據,更能理解如何運用進階節能技術進一步降低整體功耗。
AM57x 與 AM437x 處理器專用 PET:
此可下載試算表提供使用者輸入應用所需裝置參數的機制。參數包含 IP 模組活動狀態/負載量、目標電源模式及電源管理使用情境。可設定多重運作條件並為每種狀態配置時間區段。電源估算數據已內嵌於試算表中,所有結果將直接在試算表內自動生成(無需上傳任何資料)。
AM57x 專用 PET:
(...)
SPRM720 — AM570x Power Estimation Tool (PET) Spreadsheet
TIDEP-0100 — AM570x 6 層 PCB 參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (CBD) | 538 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。