首頁 無線連線 長距離 Sub-1 GHz 產品 Sub-1 GHz 無線 MCU
首頁
無線連線
長距離 Sub-1 GHz 產品
Sub-1 GHz 無線 MCU

CC1311P3

現行

具有 352KB 快閃記憶體及整合式 +20dBm 功率放大器的 SimpleLink™ Arm® Cortex®-M4 Sub-1GHz 無線 MCU

立即訂購
產品規格表
使用指南

CC1311P3

現行
產品規格表 立即訂購

產品詳細資料

Protocols 6LoWPAN, MIOTY, Proprietary, TI 15.4, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 143-176, 287-351, 359-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 20 RAM (kByte) 40 Flash memory (kByte) 352 CPU Arm® Cortex®-M4 Operating system FreeRTOS, RTOS, TI-RTOS Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, 8-bit DAC, I2C, I2S Number of GPIOs 26 RX current (lowest) (mA) 5.4 Rating Catalog Operating temperature range (°C) -40 to 105
Protocols 6LoWPAN, MIOTY, Proprietary, TI 15.4, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 143-176, 287-351, 359-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 20 RAM (kByte) 40 Flash memory (kByte) 352 CPU Arm® Cortex®-M4 Operating system FreeRTOS, RTOS, TI-RTOS Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, 8-bit DAC, I2C, I2S Number of GPIOs 26 RX current (lowest) (mA) 5.4 Rating Catalog Operating temperature range (°C) -40 to 105
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 2.63mA active mode, CoreMark
    • 55µA/MHz running CoreMark
    • 0.7µA standby mode, RTC, 32KB RAM
    • 0.1µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 5.4mA RX at 868MHz
    • 24.9mA TX at +14dBm at 868MHz
    • 65mA TX at +20dBm at 915MHz

Wireless protocol support

High-performance radio

  • -121dBm for 2.5kbps long-range mode
  • -120dBm at 4.8kbps narrowband mode, 433MHz
  • -118dBm at 9.6kbps narrowband mode, 868MHz
  • -110dBm at 50kbps, 802.15.4, 868MHz
  • Output power up to +20dBm with temperature compensation
  • Down to 4kHz receiver filter bandwidth

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Analog Comparator
  • UART, SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40 to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 2.63mA active mode, CoreMark
    • 55µA/MHz running CoreMark
    • 0.7µA standby mode, RTC, 32KB RAM
    • 0.1µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 5.4mA RX at 868MHz
    • 24.9mA TX at +14dBm at 868MHz
    • 65mA TX at +20dBm at 915MHz

Wireless protocol support

High-performance radio

  • -121dBm for 2.5kbps long-range mode
  • -120dBm at 4.8kbps narrowband mode, 433MHz
  • -118dBm at 9.6kbps narrowband mode, 868MHz
  • -110dBm at 50kbps, 802.15.4, 868MHz
  • Output power up to +20dBm with temperature compensation
  • Down to 4kHz receiver filter bandwidth

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Analog Comparator
  • UART, SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40 to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

The SimpleLink™CC1311P3 device is a multiprotocol Sub-1GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The CC1311P3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics, and medical applications.

The CC1311P3 has a software-defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 143MHz to 176MHz, 287MHz to 351MHz, 359MHz to 527-MHz, 861MHz to 1054MHz, and 1076MHz to 1315MHz frequency bands. The CC1311P3 has an efficient built-in PA that supports +14dBm TX at 24.9mA and +20dBm TX at 65mA. In RX, it has -121dBm sensitivity and 88dB blocking ±10MHz in SimpleLink™ long-range mode with 2.5kbps data rate.

The CC1311P3 has a low sleep current of 0.7µA with RTC and 32KB RAM retention.

Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1311P3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1GHz MCUs, and host MCUs. CC1311P3 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool support migration between devices in the portfolio. A comprehensive number of software stacks, application examples, and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

The SimpleLink™CC1311P3 device is a multiprotocol Sub-1GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The CC1311P3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics, and medical applications.

The CC1311P3 has a software-defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 143MHz to 176MHz, 287MHz to 351MHz, 359MHz to 527-MHz, 861MHz to 1054MHz, and 1076MHz to 1315MHz frequency bands. The CC1311P3 has an efficient built-in PA that supports +14dBm TX at 24.9mA and +20dBm TX at 65mA. In RX, it has -121dBm sensitivity and 88dB blocking ±10MHz in SimpleLink™ long-range mode with 2.5kbps data rate.

The CC1311P3 has a low sleep current of 0.7µA with RTC and 32KB RAM retention.

Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1311P3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1GHz MCUs, and host MCUs. CC1311P3 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool support migration between devices in the portfolio. A comprehensive number of software stacks, application examples, and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
filter 尋找其它 Sub-1 GHz 無線 MCU
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
CC1352P 現行 SimpleLink™ ARM Cortex-M4F 多協定低於 1 GHz 和 2.4 GHz 無線 MCU 整合式功率放大器 More RAM, added sensor controller and added dual band / Bluetooth Low Energy functionality

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC1311P3 SimpleLink™ High-Performance Sub-1GHz Wireless MCU with Integrated Power Amplifier datasheet (Rev. A) PDF | HTML 2025/4/1
* 使用指南 CC13x1x3, CC26x1x3 SimpleLink™ Wireless MCU Technical Reference Manual PDF | HTML 2022/2/14
* 勘誤表 CC1311P3 Silicon Errata PDF | HTML 2022/2/25
應用說明 How to Modify TX and RX Commands Imported/Exported from SysConfig or SmartRF™ Studio PDF | HTML 2026/4/30
應用說明 CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 2024/8/6
使用指南 SimpleLink CC131x and CC135x Family Hardware Migration Guide PDF | HTML 2024/5/2
Application brief Wireless Technologies for Solar Micro Inverters and Trackers (Rev. A) PDF | HTML 2024/4/9
應用說明 TI 15.4-Stack Software PDF | HTML 2023/10/17
應用說明 Antenna Impedance Measurement and Matching PDF | HTML 2022/3/22
應用說明 433 to 930-MHz and 2.4-GHz BOM Tunable PCB Antenna PDF | HTML 2022/2/7
技術文章 Seamlessly connect your world with 16 new wireless MCUs for the 2.4-GHz and Sub-1- PDF | HTML 2021/6/4
應用說明 TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 2017/2/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發套件

LP-CC1311P3 — 適用 SimpleLink™ sub-1-GHz 無線 MCU 的 CC1311P3 LaunchPad™ 開發套件

此 LaunchPad™ 開發套件可用來加快 SimpleLink™ sub-1-GHz 無線 MCU 的開發，並支援 TI 15.4 堆疊與專利 RF 通訊協定。CC13XX-CC26XX 軟體開發套件 (SDK) 提供軟體支援。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

KNGRY-3P-MICROPHONE — 適用於 CC1311 和 CC1312 的廣州晶銳信息技術有限公司無線數位麥克風

WA12XX 系列為 UHF 高性能數位無線麥克風系統、整合無線麥克風、雷射指標、PPT 翻頁器及其它功能。它可以自動搜尋環境中的乾淨頻道以供使用、快速鎖定頻道，並消除干擾。同時，還配有 IR 頻率配對模式，可承受嚴苛的使用環境。此系列產品採用 UHF 頻帶運作，完全避免 Wifi /2.4G/700MHz/5.8G 干擾。

從：Guangzhou Kingray Information Technology Co., Ltd.
支援產品和硬體
子卡

BDE-3P-SUB1GHZ — BDE Sub-1Ghz 模組

VDE Technology Inc. 是 TI 認證的第三方模組供應商。BDE 的模組以 TI 的 CC1XXX Sub-1Ghz 無線連線產品為基礎，讓客戶可縮短開發週期、減少設計不確定性、降低產品成本，並能有效推出具競爭力的產品。BDE 專精於提供超低功耗無線通訊技術，例如 Amazon Sidewalk、Wi-SUN、mioty 和無線 M-Bus 給全球的 OEM、系統整合商、裝置製造商和解決方案供應商。

從：BDE Technology Inc.
支援產品和硬體
偵錯探測器

LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段：   完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)

從：Lauterbach GmbH
支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體開發套件 (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ARM-CGT — Arm® 程式碼產生工具 - 編譯器

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash 快閃記憶體編程工具

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

SUB1GHZ-HW-DESIGN-REVIEW — Hardware design reviews for SimpleLink™ CC1xxx devices

開始使用 SimpleLink ™ Sub-1GHz 硬體設計審審查程序：

  • 步驟 1：申請審查之前，請務必檢閱技術文件與相關產品頁的設計與開發資源（請參閱下方的 CC1xxx 產品頁連結）。
  • 步驟 2：下載並填寫硬體設計審查申請表。
  • 步驟 3：請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至：connectivity-sub1ghz-hw-review@list.ti.com

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。

一般設計問題應張貼在我們的 (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片