HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
The TMAG5123 is a chopper-stabilized omnipolar, active-low, in-plane, Hall-effect switch sensor. The TMAG5123 eases mechanical placement of the sensor by measuring magnetic fields parallel to the surface of the printed circuit board (PCB) in a surface mount SOT-23 package.
Different sensitivity levels are available to match the specific requirement of the application. When the applied magnetic flux density value exceeds the operating point (BOP) threshold in absolute magnetic field values, the open-drain output produces a low-state voltage. The output remains low until the applied field decreases to less than the release point (BRP) threshold also in absolute terms.
The TMAG5123 incorporates a wide 2.5-V to 38-V operating voltage range and reverse polarity protection of up to -20-V, enabling robust operation for industrial appliations.
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMAG5123 為高精密度、廣泛 Vin、平面內霍爾效應感測器系列產品,專為需要更高磁性精密度和更高設計彈性的系統挑戰而設計。TMAG5123 評估模組安裝有 Sensata 499-P36-20 測試插槽,可精準測試 TMAG5123 系列的所有變體。每個裝置都具有不同的靈敏度,以測試每個靈敏度以供應用使用。TMAG5123 可在 2.5V 至 38V 的 VCC 範圍內運作,並採用標準 SOT-23 封裝。
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。