DS16F95
- Meets EIA-485 and EIA-422A
- Meets SCSI-1 (5 MHZ) Specifications
- Designed for Multipoint Transmission
- Wide Positive and Negative Input/Output Bus Voltage Ranges
- Thermal Shutdown Protection
- Driver Positive and Negative Current-Limiting
- High Impedance Receiver Input
- Receiver Input Hysteresis of 50 mV Typical
- Operates from Single 5.0V Supply
- Reduced Power Consumption
- Pin Compatible with DS3695 and SN75176A
- Military Temperature Range Available
- Qualified for MIL-STD 883C
- Standard Military Drawings (SMD) Available
- Available in 8-Pin CDIP (NAB0008A) or SOIC (D) Package
All trademarks are the property of their respective owners.
The DS16F95/DS36F95 Differential Bus Transceiver is a monolithic integrated circuit designed for bidirectional data communication on balanced multipoint bus transmission lines. The transceiver meets both EIA-485 and EIA-422A standards.
The DS16F95/DS36F95 offers improved performance due to the use of L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by minimizing gate delay times. Thus, the DS16F95 and DS36F95 consume less power, and feature an extended temperature range as well as improved specifications.
The DS16F95/DS36F95 combines a Tri-state differential line driver and a differential input line receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active Enable that can be externally connected to function as a direction control. The driver differential outputs and the receiver differential inputs are internally connected to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or when VCC = 0V. These ports feature wide positive and negative common mode voltage ranges, making the device suitable for multipoint applications in noisy environments.
The driver is designed to accommodate loads of up to 60 mA of sink or source current and features positive and negative current limiting in addition to thermal shutdown for protection from line fault conditions.
The DS16F95/DS36F95 can be used in transmission line applications employing the DS96F172 and the DS96F174 quad differential line drivers and the DS96F173 and DS96F175 quad differential line receivers.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DS16F95, DS36F95 EIA-485/EIA-422A Differential Bus Transceiver datasheet (Rev. D) | 2013年 4月 12日 | |
More literature | Die D/S DS16F95 MDR MCD1160A EIA-48 5/EIA-422A Differential Bus Transceivers | 2012年 10月 24日 | ||
More literature | Die D/S DS16F95 MDS MCD1160A EIA-485/EIA-422A Differential Bus Transceivers | 2012年 10月 24日 | ||
More literature | Die D/S DS16F95 MDS MCD2200A EIA-485/EIA-422A Differential Bus Transceivers | 2012年 10月 24日 | ||
More literature | Die D/SDAC121S101 MDR MCD3080A 12-Bit Micro Power Digital-to-Analog Conv w/ Rail | 2012年 10月 24日 | ||
More literature | Die D/S DS16F95 MDA Eia-485/Eia-422A Differential Bus Transceivers | 2012年 9月 6日 | ||
More literature | Die D/S DS16F95 MDR Eia-485/Eia-422A Differential Bus Transceivers | 2012年 9月 6日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 引腳 | 下載 |
---|---|---|
DIESALE (Y) | — |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點