首頁 介面 高速 SerDes FPD-Link SerDes
首頁
介面
高速 SerDes
FPD-Link SerDes

DS90UB983-Q1

現行

4K DisplayPort™/eDP 至 FPD-Link IV 橋接器串聯器

立即訂購
產品規格表

DS90UB983-Q1

現行
產品規格表 立即訂購

產品詳細資料

Applications In-vehicle Infotainment (IVI) Input compatibility DisplayPort/eDP Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 25.9 Serial video bandwidth (per port) (max) (Gbps) 13.1 Features Daisy chain, Low-EMI Point-to-Point Communication, Spread-Spectrum Clock (SSC) Generation Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
Applications In-vehicle Infotainment (IVI) Input compatibility DisplayPort/eDP Function Serializer Output compatibility FPD-Link IV LVDS Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 25.9 Serial video bandwidth (per port) (max) (Gbps) 13.1 Features Daisy chain, Low-EMI Point-to-Point Communication, Spread-Spectrum Clock (SSC) Generation Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
VQFNP (RTD) 64 81 mm² (9 mm × 9 mm)
  • DisplayPort receiver
    • DP/eDP v1.4 compatible
    • Supports data lane swap and polarity inversion
    • HBR3/HBR2/HBR/RBR link bit rates
    • Main link: 1, 2, or 4 lanes
    • Each lane up to 8.1Gbps
    • AUX CH 1Mbps
    • Hot plug detect (HPD)
    • Multi-display (MST) and SST support
    • Supports Symmetric and Asymmetric MST
    • Daisy chaining and splitting
    • SuperFrame unpacking capability
    • Suitable for 4K at 60Hz video resolution
  • FPD-Link IV interface
    • Supports 13.5/12.528/10.8/6.75/3.375Gbps per channel; Up to 27Gbps over dual channels
    • Coax/STP interconnect support
    • Port splitting to enable Y-cable interfaces
    • MST and SuperFrame based data splitting to different FPD channels
  • Ultra-low latency control channel
    • Three fast-mode plus I2C up to 1MHz (up to 3.4MHz for local bus access)
    • High speed GPIOs
  • Backwards compatibility
    • IVI 94x and 92x product families
  • Security and diagnostics
    • Link diagnostics
    • Voltage and temperature monitoring
    • Line fault detection
    • BIST and pattern generation
    • CRC and error diagnostics
    • ECC error correction for control bits
    • Replica mode for redundancy
  • Advanced link robustness and EMC control
    • Spread Spectrum Clocking (SSC) input support
    • Spread Spectrum Clocking Generation (SSCG)
    • Data scrambling
  • Low power operation
    • 1.8V and 1.15V dual power supply
  • AEC-Q100 qualified for automotive applications
    • AEC-Q grade-level 2, –40°C to 105°C
    • 64 pin QFN wettable flanks 9mm × 9mm
    • ISO 10605 and IEC 61000-4-2 ESD compliant
  • DisplayPort receiver
    • DP/eDP v1.4 compatible
    • Supports data lane swap and polarity inversion
    • HBR3/HBR2/HBR/RBR link bit rates
    • Main link: 1, 2, or 4 lanes
    • Each lane up to 8.1Gbps
    • AUX CH 1Mbps
    • Hot plug detect (HPD)
    • Multi-display (MST) and SST support
    • Supports Symmetric and Asymmetric MST
    • Daisy chaining and splitting
    • SuperFrame unpacking capability
    • Suitable for 4K at 60Hz video resolution
  • FPD-Link IV interface
    • Supports 13.5/12.528/10.8/6.75/3.375Gbps per channel; Up to 27Gbps over dual channels
    • Coax/STP interconnect support
    • Port splitting to enable Y-cable interfaces
    • MST and SuperFrame based data splitting to different FPD channels
  • Ultra-low latency control channel
    • Three fast-mode plus I2C up to 1MHz (up to 3.4MHz for local bus access)
    • High speed GPIOs
  • Backwards compatibility
    • IVI 94x and 92x product families
  • Security and diagnostics
    • Link diagnostics
    • Voltage and temperature monitoring
    • Line fault detection
    • BIST and pattern generation
    • CRC and error diagnostics
    • ECC error correction for control bits
    • Replica mode for redundancy
  • Advanced link robustness and EMC control
    • Spread Spectrum Clocking (SSC) input support
    • Spread Spectrum Clocking Generation (SSCG)
    • Data scrambling
  • Low power operation
    • 1.8V and 1.15V dual power supply
  • AEC-Q100 qualified for automotive applications
    • AEC-Q grade-level 2, –40°C to 105°C
    • 64 pin QFN wettable flanks 9mm × 9mm
    • ISO 10605 and IEC 61000-4-2 ESD compliant

The DS90UB983-Q1 is a DisplayPort/eDP to FPD-Link III/IV bridge device. In conjunction with an FPD-Link IV deserializer, the chipset provides a high-speed serialized interface over low-cost 50Ω coax or STP cables. The DS90UB983-Q1 is a VESA DP Standard v1.4 compatible device that supports advanced features such as MST, HBR3, and SuperFrame formats. The device is capable of supporting video resolution up to 4K resolutions with 30-bit color. 8b10b encoded DP data is serialized onto an FPD-Link IV interface output. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C, and GPIO data over a single channel or dual channels. Consolidation of video data and control over FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, SSCG, and randomization. In backward compatible mode, the device supports up to 720p and 1080p resolutions with 24 bit color depth over a single/dual link.

The DS90UB983-Q1 is a DisplayPort/eDP to FPD-Link III/IV bridge device. In conjunction with an FPD-Link IV deserializer, the chipset provides a high-speed serialized interface over low-cost 50Ω coax or STP cables. The DS90UB983-Q1 is a VESA DP Standard v1.4 compatible device that supports advanced features such as MST, HBR3, and SuperFrame formats. The device is capable of supporting video resolution up to 4K resolutions with 30-bit color. 8b10b encoded DP data is serialized onto an FPD-Link IV interface output. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C, and GPIO data over a single channel or dual channels. Consolidation of video data and control over FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, SSCG, and randomization. In backward compatible mode, the device supports up to 720p and 1080p resolutions with 24 bit color depth over a single/dual link.
filter 尋找其它 FPD-Link SerDes
下載 觀看有字幕稿的影片 影片
索取更多資訊

提供完整產品規格表及其他資源。立即索取

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DS90UB983-Q1 4K DisplayPort/eDP to FPD-Link IV Bridge Serializer datasheet PDF | HTML 2024/2/22
應用說明 I2C Mechanisms in IVI FPD-Link IV Devices PDF | HTML 2026/7/24

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB983-Q1CEVM — 適用於同軸纜線應用的 DS90UB983-Q1 DisplayPort 至 FPD-Link IV 橋接串聯器評估模組

DS90UB983-Q1CEVM 是用於評估 DS90UB983-Q1 DisplayPort 至 FPD-Link IV 串聯器的評估模組。DS90UB983-Q1 支援超高解析度，包括在 60Hz 下每像素 30 位元的 4K。DisplayPort 輸入與 DisplayPort v1.4 相容，速度可達每通道 8.1Gbps，而 FPD-Link 介面在 FPD-Link IV 模式下支援每通道最高 13.5Gbps，或在 FPD-Link III 模式下支援每通道最高 3.675Gbps。DS90UB983-Q1CEVM 的 FPD-Link 互連是車用 Rosenberger (...)

支援產品和硬體
開發板

DS90UB983-Q1EVM — DS90UB983-Q1 DisplayPort 至 FPD-Link IV 橋接串聯器評估模組

DS90Ux983-Q1EVM 是用於評估 DS90Ux983-Q1 DisplayPort 至 FPD-Link IV 串聯器的評估模組。DS90Ux983-Q1 支援超高解析度，包括在 60Hz 下每像素 30 位元的 4K。DisplayPort 輸入與 DisplayPort v1.4 相容，速度可達每通道 8.1Gbps，而 FPD-Link 介面在 FPD-Link IV 模式下支援每通道最高 13.5Gbps，或在 FPD-Link III 模式下支援每通道最高 3.675Gbps。DS90Ux983-Q1EVM 的 FPD-Link 互連是一款車用 Rosenberger (...)

支援產品和硬體
開發板

DS90UB983-Q1MEVM — DS90UB983-Q1 DisplayPort 至 FPD-Link IV 橋接串聯器評估模組

DS90Ux983-Q1MEVM 是用於評估 DS90Ux983-Q1 DisplayPort 至 FPD-Link IV 串聯器的評估模組。  DS90Ux983-Q1 支援超高解析度，包括在 60Hz 下每像素 30 位元的 4K。DisplayPort 輸入與 DisplayPort v1.4 相容，速度可達每通道 8.1Gbps，而 FPD-Link 介面在 FPD-Link IV 模式下支援每通道最高 13.5Gbps，或在 FPD-Link III 模式下支援每通道最高 3.675Gbps。DS90Ux983-Q1MEVM 的 FPD-Link 互連為車用 12 路 Molex (...)

支援產品和硬體
支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFNP (RTD) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片