首頁 電源管理 線性與低壓差 (LDO) 穩壓器
首頁
電源管理
線性與低壓差 (LDO) 穩壓器

LM2940QML-SP

現行

輻射強化、QML-V、6V 至 26V 輸入、1A、5V 輸出線性穩壓器

立即訂購
產品規格表

LM2940QML-SP

現行
產品規格表 立即訂購

產品詳細資料

Rating Space Vin (max) (V) 26 Vin (min) (V) 6 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 5 Fixed output options (V) 5 Noise (µVrms) 350 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 136 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 5 Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) Bipolar Radiation, TID (typ) (krad) 100
Rating Space Vin (max) (V) 26 Vin (min) (V) 6 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 5 Fixed output options (V) 5 Noise (µVrms) 350 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 136 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 5 Dropout voltage (Vdo) (typ) (mV) 500 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) Bipolar Radiation, TID (typ) (krad) 100
CFP (NAC) 16 62.9285 mm² (— mm × — mm) DIESALE (Y) — See data sheet
  • Available with Radiation Ensure
    • ELDRS Free 100 krad(Si)
  • Dropout Voltage Typically 0.5V @IO = 1A
  • Output Current in Excess of 1A
  • Output Voltage Trimmed Before Assembly
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection

All trademarks are the property of their respective owners.

  • Available with Radiation Ensure
    • ELDRS Free 100 krad(Si)
  • Dropout Voltage Typically 0.5V @IO = 1A
  • Output Current in Excess of 1A
  • Output Voltage Trimmed Before Assembly
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection

All trademarks are the property of their respective owners.

The LM2940 positive voltage regulator features the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30 mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN − VOUT ≤ 3V).

Designed also for vehicular applications, the LM2940 and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. The LM2940 cannot be harmed by temporary mirror-image insertion. Familiar regulator features such as short circuit and thermal overload protection are also provided.

The LM2940 positive voltage regulator features the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30 mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN − VOUT ≤ 3V).

Designed also for vehicular applications, the LM2940 and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. The LM2940 cannot be harmed by temporary mirror-image insertion. Familiar regulator features such as short circuit and thermal overload protection are also provided.
filter 尋找其它 線性與低壓差 (LDO) 穩壓器
下載 觀看有字幕稿的影片 影片
TI 提供有限的設計支援

使用此產品的現有專案具備有限的 TI 設計支援。若有提供，您可在此頁面找到相關資訊、工具和軟體。使用此產品的現有設計具備有限的 TI 設計支援。在 TI E2E™ 支援論壇中申請有限的設計支援。

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
最新 TPS7H1121-SEP 現行 輻射強化、2.25V 至 14V 輸入、2A 低壓差 (LDO) 穩壓器 This is a full featured higher current -SEP LDO.
TPS7H1121-SP 現行 輻射強化、QML-V、2.25V 至 14V 輸入、2A 低壓差 (LDO) 穩壓器 QMLV version with higher TID and SEE radiation performance

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM2940QML 1A Low Dropout Regulator datasheet (Rev. B) 2013/5/2
* 輻射及可靠性報告 LM2940QML-SP Neutron Displacement Damage (NDD) Characterization Report 2021/10/29
* 輻射及可靠性報告 LM2940WG5.0RLQV ELDRS Characterization Report 2012/5/11
* SMD LM2940QML-SP SMD 5962R8958704VXA 2016/6/21
選擇指南 TI Space Products (Rev. L) 2026/3/27
應用說明 Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 2025/11/5
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025/6/17
應用說明 Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025/6/10
更多文件說明 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025/2/20
應用說明 QML flow, its importance, and obtaining lot information (Rev. C) 2023/8/30
應用說明 Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022/10/19
應用說明 DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 2020/8/21
電子書 Radiation Handbook for Electronics (Rev. A) 2019/5/21
應用說明 Use of an LDO as a Load Switch for Space Applications 2018/8/1

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
CFP (NAC) 16 Ultra Librarian
DIESALE (Y) — Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片