產品詳細資料

Number of ADC channels 1 Number of DAC channels 3 Digital audio interface I2S, PCM Analog inputs 2 Analog outputs 3 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 81 DAC SNR (typ) (dB) 86 Operating temperature range (°C) -40 to 85
Number of ADC channels 1 Number of DAC channels 3 Digital audio interface I2S, PCM Analog inputs 2 Analog outputs 3 Sampling rate (max) (kHz) 48 Rating Catalog ADC SNR (typ) (dB) 81 DAC SNR (typ) (dB) 86 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 42 12.1875 mm² 3.75 x 3.25
  • 18-bit 44.1kHz or 48kHz Stereo DAC
  • 16-bit 8kHz , 12kHz , 16kHz, or 24kHz Voice-Band Codec
  • PLL for Operation from Common System Clocks
  • Either I2C or SPI Compatible Serial Interface
  • I2S Digital Audio Data Serial Interface
  • PCM Voice Audio Data Serial Interface
  • Differential Analog Microphone Input
  • 26mW/Channel Stereo Headphone Amplifier
  • 570mW Mono High Efficiency BTL 8Ω Amplifier
  • 32-step Volume Control for Audio Output Amplifiers with 1.5dB Step Size.
  • Unity-Gain Stable Headphone Amplifiers
  • No Snubber Networks or Bootstrap Capacitors are Required by the Headphone or Hands-Free Amplifiers
  • Adjustable Digital Side-Tone Attenuation
  • 16-step Volume Control for Microphone Preamp with 2dB Step Size
  • Configurable GPIO/Status Port
  • Available in the 42 bump DSBGA Package

Key Specifications

  • PLS OUT at AVDD = 5V, 8Ω
    • 1% THD+N, 1.1W (Typ)
  • PLS OUT at AVDD = 3.3V, 8Ω
    • 1% THD+N, 570mW (Typ)
  • PH/P OUT at AVDD = 5V & AVDD = 3.3V, 32Ω
    • 1% THD+N, 26mW (Typ)
  • Supply Voltage Range
    • DVDD, 2.7V to 4.0V
    • AVDD, 2.7V to 5.0V
  • Shutdown Current, 1.1µA
  • PSRR at 217Hz, AVDD = 3V, 62dB (Typ)
  • SNR (Voice Codec), 75dB (Typ)
  • SNR (Audio DAC), 86dB (Typ)

All trademarks are the property of their respective owners.

  • 18-bit 44.1kHz or 48kHz Stereo DAC
  • 16-bit 8kHz , 12kHz , 16kHz, or 24kHz Voice-Band Codec
  • PLL for Operation from Common System Clocks
  • Either I2C or SPI Compatible Serial Interface
  • I2S Digital Audio Data Serial Interface
  • PCM Voice Audio Data Serial Interface
  • Differential Analog Microphone Input
  • 26mW/Channel Stereo Headphone Amplifier
  • 570mW Mono High Efficiency BTL 8Ω Amplifier
  • 32-step Volume Control for Audio Output Amplifiers with 1.5dB Step Size.
  • Unity-Gain Stable Headphone Amplifiers
  • No Snubber Networks or Bootstrap Capacitors are Required by the Headphone or Hands-Free Amplifiers
  • Adjustable Digital Side-Tone Attenuation
  • 16-step Volume Control for Microphone Preamp with 2dB Step Size
  • Configurable GPIO/Status Port
  • Available in the 42 bump DSBGA Package

Key Specifications

  • PLS OUT at AVDD = 5V, 8Ω
    • 1% THD+N, 1.1W (Typ)
  • PLS OUT at AVDD = 3.3V, 8Ω
    • 1% THD+N, 570mW (Typ)
  • PH/P OUT at AVDD = 5V & AVDD = 3.3V, 32Ω
    • 1% THD+N, 26mW (Typ)
  • Supply Voltage Range
    • DVDD, 2.7V to 4.0V
    • AVDD, 2.7V to 5.0V
  • Shutdown Current, 1.1µA
  • PSRR at 217Hz, AVDD = 3V, 62dB (Typ)
  • SNR (Voice Codec), 75dB (Typ)
  • SNR (Audio DAC), 86dB (Typ)

All trademarks are the property of their respective owners.

The LM4931 is an integrated audio subsystem that supports voice and digital audio functions. The LM4931 includes a high quality stereo DAC, voice band codec, a stereo headphone amplifier and a high-power high efficiency mono speaker amplifier. It is primarily designed for demanding applications in mobile phones and other portable devices.

The LM4931 features an I2S serial interface for full range audio, a 16-bit PCM bi-directional serial interface for the voice band codec and an I2C/SPI compatible interface for control. The full range music path features an SNR of 86dB with an 18-bit 48kHz input. The headphone amplifier delivers at least 26mWRMS to a 32Ω single-ended stereo load with less than 1% distortion (THD+N) when AVDD = 3.3VDC. The mono speaker amplifier delivers up to 570mWRMS into an 8Ω load with less than 1% distortion when AVDD = 3.3VDC.

The LM4931 employs advanced techniques to reduce power consumption, to reduce controller overhead, and to eliminate click and pop. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. It is therefore ideally suited for mobile phone and other low voltage applications where minimal power consumption, PCB area, and cost are primary requirements.

The LM4931 is an integrated audio subsystem that supports voice and digital audio functions. The LM4931 includes a high quality stereo DAC, voice band codec, a stereo headphone amplifier and a high-power high efficiency mono speaker amplifier. It is primarily designed for demanding applications in mobile phones and other portable devices.

The LM4931 features an I2S serial interface for full range audio, a 16-bit PCM bi-directional serial interface for the voice band codec and an I2C/SPI compatible interface for control. The full range music path features an SNR of 86dB with an 18-bit 48kHz input. The headphone amplifier delivers at least 26mWRMS to a 32Ω single-ended stereo load with less than 1% distortion (THD+N) when AVDD = 3.3VDC. The mono speaker amplifier delivers up to 570mWRMS into an 8Ω load with less than 1% distortion when AVDD = 3.3VDC.

The LM4931 employs advanced techniques to reduce power consumption, to reduce controller overhead, and to eliminate click and pop. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. It is therefore ideally suited for mobile phone and other low voltage applications where minimal power consumption, PCB area, and cost are primary requirements.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM4931 Audio Subsystem w/Mono High Eff Loudspeaker & Stereo Headphone Amps datasheet (Rev. E) 2013年 5月 1日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YZR) 42 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片