首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

LM5575

現行

6V 至 75V、1.5A 大範圍 Vin 降壓穩壓器

立即訂購
產品規格表

LM5575

現行
立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 75 Vin (min) (V) 6 Vout (max) (V) 70 Vout (min) (V) 1.23 Features Enable, Frequency synchronization, Over Current Protection, Tracking Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 75 Vin (min) (V) 6 Vout (max) (V) 70 Vout (min) (V) 1.23 Features Enable, Frequency synchronization, Over Current Protection, Tracking Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
HTSSOP (PWP) 16 32 mm² (5 mm × 6.4 mm)
  • Integrated 75V, 330mΩ N-Channel MOSFET
  • Ultra-wide input voltage range from 6V to 75V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 500kHz with a single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • Create a custom design using the LM5575 with the WEBENCH Power Designer
  • Integrated 75V, 330mΩ N-Channel MOSFET
  • Ultra-wide input voltage range from 6V to 75V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 500kHz with a single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • Create a custom design using the LM5575 with the WEBENCH Power Designer

The LM5575 is an easy-to-use buck regulator that allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 75V, the LM5575 delivers 1.5A of continuous output current with an integrated 330mΩ N-Channel MOSFET. The regulator uses an emulated current mode architecture which provides inherent line regulation, tight load transient response, and ease-of-loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM5575 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a power-enhanced, 16-pin HTSSOP package that features an exposed die attach pad for thermal dissipation. The LM5575 is supported by the full suite of WEBENCH circuit design and selection simulation services online design tools.

The LM5575 is an easy-to-use buck regulator that allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 75V, the LM5575 delivers 1.5A of continuous output current with an integrated 330mΩ N-Channel MOSFET. The regulator uses an emulated current mode architecture which provides inherent line regulation, tight load transient response, and ease-of-loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM5575 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a power-enhanced, 16-pin HTSSOP package that features an exposed die attach pad for thermal dissipation. The LM5575 is supported by the full suite of WEBENCH circuit design and selection simulation services online design tools.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 22
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM5575 75V, 1.5A Step-Down Switching Regulator datasheet (Rev. H) PDF | HTML 2026/4/22
應用說明 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/3/25
白皮書 Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018/7/3
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
技術文章 How to increase system reliability and simplify design using DC/DC converters PDF | HTML 2016/6/13
技術文章 The importance of accurate switching frequency and current limit when selecting bu PDF | HTML 2016/4/19
應用說明 Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/9/12
應用說明 AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013/5/6
應用說明 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/4/24
應用說明 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/4/23
應用說明 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/4/23
應用說明 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/4/23
應用說明 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/4/23
應用說明 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/4/23
應用說明 Quick Start Guide for a 1.5 Amp Buck Regulator Using the LM5575 and LM25575 (Rev. B) 2013/4/23
應用說明 AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/4/23
應用說明 AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/4/23
應用說明 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/4/23
應用說明 Understanding and Applying Current-Mode Control Theory 2007/8/19
應用說明 Input and Output Capacitor Selection 2005/9/19
更多文件說明 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/7/12
應用說明 AN-643 EMI/RFI Board Design (Rev. B) 2004/5/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5575EVAL — 75V、1.5A 降壓式切換穩壓器評估模組

The LM5575 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM5575 regulator IC. The evaluation board provides a 5V output with a 1.5A current capability. The ultra-wide input voltage ranges (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LM5575 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM033A.ZIP (86 KB) - PSpice 模型
支援產品和硬體
支援產品和硬體
模擬型號

LM5575 PSpice Average Model

SNVMBI3.ZIP (95 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5575 TINA-TI Transient Reference Design

SNVM352.TSC (146 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LM5575 TINA-TI Transient Spice Model

SNVM351.ZIP (17 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

LM5575 Unencrypted PSpice Average Model

SNVMBI2.ZIP (2 KB) - PSpice 模型
支援產品和硬體
計算工具

LM2557X-557XQUICK-CALC — LM(2)557x 快速入門 SIMPLE SWITCHER 元件計算機

支援產品和硬體
計算工具

SIMPLESWITCHER-COMPONENT-CALC — 可下載的 LM(2)557x 快速入門 SIMPLE SWITCHER 元件計算機

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片