首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

LM65440-Q1

現行

Automotive 3V-to-36V, 4A, stackable buck converter with mitigated interference and noise technology

立即訂購
產品規格表

LM65440-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 35 Vout (min) (V) 0.8 Features Auto Mode, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Over Current Protection, Soft Start Fixed, Stackable, Synchronous Rectification, UVLO fixed, Wettable flanks package EMI & noise features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000003 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 35 Vout (min) (V) 0.8 Features Auto Mode, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Over Current Protection, Soft Start Fixed, Stackable, Synchronous Rectification, UVLO fixed, Wettable flanks package EMI & noise features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000003 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
WQFN-FCRLF (RZT) 20 9.36 mm² (3.6 mm × 2.6 mm)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Facilitates CISPR 25 class 5 compliance
    • ±5% dual-random spread spectrum
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Low minimum on time: 40ns (maximum)
  • Switching frequency from 300kHz to 2.2MHz
  • Pin-configurable 400kHz and 2.1MHz
  • Pin-configurable AUTO or FPWM operation
  • Dual phase capable up to 16A for high current designs
  • Pin-pin with the 65V LM656x5-Q1 family
  • High-efficiency power conversion at all loads
    • > 94.65% peak efficiency at 12VIN, 5VOUT, 400kHz
    • 3.0µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 24.0°C/W (LM654x0-Q1EVM)
  • Create a custom design using the LM654x0-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Facilitates CISPR 25 class 5 compliance
    • ±5% dual-random spread spectrum
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Low minimum on time: 40ns (maximum)
  • Switching frequency from 300kHz to 2.2MHz
  • Pin-configurable 400kHz and 2.1MHz
  • Pin-configurable AUTO or FPWM operation
  • Dual phase capable up to 16A for high current designs
  • Pin-pin with the 65V LM656x5-Q1 family
  • High-efficiency power conversion at all loads
    • > 94.65% peak efficiency at 12VIN, 5VOUT, 400kHz
    • 3.0µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 24.0°C/W (LM654x0-Q1EVM)
  • Create a custom design using the LM654x0-Q1 with the WEBENCH Power Designer

The LM654x0-Q1 are a family of automotive buck converters designed for high-efficiency, high-power density, and ultra-low electromagnetic interference (EMI) with mitigated interference and noise technology (MINT 1) switcher technology. The converters operate over a wide input voltage range of 3V to 36V (42V tolerant) The LM654x0-Q1 is dual phase capable by simply connecting the compensated error signal between the primary and secondary device. The LM654x0-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.

The LM654x0-Q1 are a family of automotive buck converters designed for high-efficiency, high-power density, and ultra-low electromagnetic interference (EMI) with mitigated interference and noise technology (MINT 1) switcher technology. The converters operate over a wide input voltage range of 3V to 36V (42V tolerant) The LM654x0-Q1 is dual phase capable by simply connecting the compensated error signal between the primary and secondary device. The LM654x0-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM654x0-Q1 High-Performance, Stackable Power Converter, 3V to 36V , Pin-Compatible 4A, 6A, 8A, Automotive , Low EMI With Mitigated Interference and Noise Technology (MINT) Synchronous Buck Converters datasheet (Rev. A) PDF | HTML 2026/8/26
功能安全資訊 LM654x0 and LM654x0-Q1-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026/8/26

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (RZT) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片