首頁 時鐘與計時 時鐘抖動清除器
首頁
時鐘與計時
時鐘抖動清除器

LMK04208

現行

具 6 個可編程輸出的超低雜訊時脈抖動清除器

立即訂購
產品規格表

LMK04208

現行
產品規格表 立即訂購

產品詳細資料

Number of input channels 2 Number of outputs 7 RMS jitter (fs) 111 Features 0 Delay Output frequency (min) (MHz) 0.329 Output frequency (max) (MHz) 3072 Output type LVCMOS, LVDS, LVPECL Input type LVCMOS, LVDS, LVPECL Operating temperature range (°C) -40 to 85
Number of input channels 2 Number of outputs 7 RMS jitter (fs) 111 Features 0 Delay Output frequency (min) (MHz) 0.329 Output frequency (max) (MHz) 3072 Output type LVCMOS, LVDS, LVPECL Input type LVCMOS, LVDS, LVPECL Operating temperature range (°C) -40 to 85
WQFN (NKD) 64 81 mm² (9 mm × 9 mm)
  • Ultra-Low RMS Jitter Performance
    • 111 fs, RMS Jitter (12 kHz to 20 MHz)
    • 123 fs, RMS Jitter (100 Hz to 20 MHz)
  • Dual Loop PLLatinum™ PLL Architecture
  • PLL1
    • Integrated Low-Noise Crystal Oscillator Circuit
    • Holdover Mode when Input Clocks are Lost
      • Automatic or Manual Triggering/Recovery
  • PLL2
    • Normalized PLL Noise Floor of –227 dBc/Hz
    • Phase Detector Rate of Up to 155 MHz
    • OSCin Frequency-Doubler
    • Integrated Low-Noise VCO or External VCO Mode
  • Two Redundant Input Clocks with LOS
    • Automatic and Manual Switch-Over Modes
  • 50 % Duty Cycle Output Divides, 1 to 1045 (Even and Odd)
  • 6 LVPECL, LVDS, or LVCMOS Programmable Outputs
  • Digital Delay: Fixed or Dynamically Adjustable
  • 25 ps Step Analog Delay Control
  • 7 Differential Outputs, Up to 14 Single-Ended
    • Up to 6 VCXO/Crystal Buffered Outputs
  • Clock Rates of Up to 1536 MHz
  • 0-Delay Mode
  • Three Default Clock Outputs at Power Up
  • Multi-Mode: Dual PLL, Single PLL, and Clock Distribution
  • Industrial Temperature Range: –40°C to +85°C
  • 3.15-V to 3.45-V Operation
  • 64-Pin WQFN Package (9.0 × 9.0 × 0.8 mm)
  • Ultra-Low RMS Jitter Performance
    • 111 fs, RMS Jitter (12 kHz to 20 MHz)
    • 123 fs, RMS Jitter (100 Hz to 20 MHz)
  • Dual Loop PLLatinum™ PLL Architecture
  • PLL1
    • Integrated Low-Noise Crystal Oscillator Circuit
    • Holdover Mode when Input Clocks are Lost
      • Automatic or Manual Triggering/Recovery
  • PLL2
    • Normalized PLL Noise Floor of –227 dBc/Hz
    • Phase Detector Rate of Up to 155 MHz
    • OSCin Frequency-Doubler
    • Integrated Low-Noise VCO or External VCO Mode
  • Two Redundant Input Clocks with LOS
    • Automatic and Manual Switch-Over Modes
  • 50 % Duty Cycle Output Divides, 1 to 1045 (Even and Odd)
  • 6 LVPECL, LVDS, or LVCMOS Programmable Outputs
  • Digital Delay: Fixed or Dynamically Adjustable
  • 25 ps Step Analog Delay Control
  • 7 Differential Outputs, Up to 14 Single-Ended
    • Up to 6 VCXO/Crystal Buffered Outputs
  • Clock Rates of Up to 1536 MHz
  • 0-Delay Mode
  • Three Default Clock Outputs at Power Up
  • Multi-Mode: Dual PLL, Single PLL, and Clock Distribution
  • Industrial Temperature Range: –40°C to +85°C
  • 3.15-V to 3.45-V Operation
  • 64-Pin WQFN Package (9.0 × 9.0 × 0.8 mm)

The LMK04208 is a high performance clock conditioner with superior clock jitter cleaning, generation, and distribution with advanced features to meet next generation system requirements. The dual loop PLLatinum™ architecture is capable of 111 fs, RMS jitter (12 kHz to 20 MHz) using a low-noise VCXO module or sub-200 fs rms jitter (12 kHz to 20 MHz) using a low cost external crystal and varactor diode.

The dual loop architecture consists of two high-performance phase-locked loops (PLL), a low-noise crystal oscillator circuit, and a high-performance voltage controlled oscillator (VCO). The first PLL (PLL1) provides low-noise jitter cleaner functionality while the second PLL (PLL2) performs the clock generation. PLL1 can be configured to either work with an external VCXO module or the integrated crystal oscillator with an external tunable crystal and varactor diode. When paired with a very narrow loop bandwidth, PLL1 uses the superior close-in phase noise (offsets below 50 kHz) of the VCXO module or the tunable crystal to clean the input clock. The output of PLL1 is used as the clean input reference to PLL2 where it locks the integrated VCO. The loop bandwidth of PLL2 can be optimized to clean the far-out phase noise (offsets above 50 kHz) where the integrated VCO outperforms the VCXO module or tunable crystal used in PLL1.

The LMK04208 is a high performance clock conditioner with superior clock jitter cleaning, generation, and distribution with advanced features to meet next generation system requirements. The dual loop PLLatinum™ architecture is capable of 111 fs, RMS jitter (12 kHz to 20 MHz) using a low-noise VCXO module or sub-200 fs rms jitter (12 kHz to 20 MHz) using a low cost external crystal and varactor diode.

The dual loop architecture consists of two high-performance phase-locked loops (PLL), a low-noise crystal oscillator circuit, and a high-performance voltage controlled oscillator (VCO). The first PLL (PLL1) provides low-noise jitter cleaner functionality while the second PLL (PLL2) performs the clock generation. PLL1 can be configured to either work with an external VCXO module or the integrated crystal oscillator with an external tunable crystal and varactor diode. When paired with a very narrow loop bandwidth, PLL1 uses the superior close-in phase noise (offsets below 50 kHz) of the VCXO module or the tunable crystal to clean the input clock. The output of PLL1 is used as the clean input reference to PLL2 where it locks the integrated VCO. The loop bandwidth of PLL2 can be optimized to clean the far-out phase noise (offsets above 50 kHz) where the integrated VCO outperforms the VCXO module or tunable crystal used in PLL1.

filter 尋找其它 時鐘抖動清除器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LMK04208 Low-Noise Clock Jitter Cleaner with Dual Loop PLLs datasheet PDF | HTML 2016/9/1

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMK04208EVM — 具有雙路串接 PLL 和整合 2.9 GHz VCO 的雙輸入、6+1 輸出時鐘抖動清除器

LMK04208EVM 可評估具測試設備或其他評估電路板的 LMK04208，以驗證特定應用項目的區塊或系統需求。  LMK04208 EVM 預先安裝了 122.88 MHz VCXO，適用於雙迴路運作。  若需不同頻率 VCXO 或特定 VCXO 進行性能評估，可替換該 VCXO。  該電路板可經過改裝，停用 VCXO 並將外部參考時鐘連接至 OSCin 埠，以實現 PLL2 單迴路運作模式。  CLKin1 輸入亦可設定為時鐘分頻/延遲/扇出配置模式來驅動電路板運作。  LMK04208 是一款多功能裝置，而 LMK04208 評估模組可讓您評估 LMK04208 的各種配置方式。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
軟體程式設計工具

CODELOADER — CodeLoader Device Register Programming v4.19.0

The CodeLoader 4 software is used to program the LMX PLLs and LMK timing devices through either the USB or line print terminal (LPT) port of a computer. This software also provides information on how to program the device by showing the bits that are actually sent.

Which software do I use?

Product

(...)

支援產品和硬體
支援軟體

CLOCKDESIGNTOOL — Clock Design Tool Software

時脈設計工具軟體可協助進行零件選擇、迴路濾波器設計，以及計時裝置解決方案模擬。當您輸入所需的輸出頻率和參考頻率 (選用) 時，此工具可提供符合指定需求、分頻器值和建議迴路濾波器的 TI 裝置，以將抖動降到最低。

CLOCKDESIGNTOOL 教學影片

我應該使用哪個軟體？

產品

迴路濾波器和裝置配置 + 模擬

模擬工具

裝置暫存器程式化

LMX24xx PLL 系列

EasyPLL

時脈系統架構

CodeLoader

LMX25xx PLL+VCO 系列

時脈設計工具

LMK 抖動清除器及分配器

支援產品和硬體
支援軟體

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

德州儀器 (TI) 的時鐘及合成器 (TICS) 專業級軟體用於編程具有以下前置字元的產品編號的評估模組 (EVM)：CDC、LMK 和 LMX。這些產品包括鎖相迴路及電壓控制振盪器 (PLL+VCO)、合成器和時鐘裝置。

支援產品和硬體
模擬型號

LMK04208 IBIS Model

SNAM200.ZIP (111 KB) - IBIS 模型
支援產品和硬體
設計工具

CLOCK-TREE-ARCHITECT — 時鐘樹架構程式設計軟體

時鐘樹架構是一款時鐘樹合成工具，可根據您的系統需求產生時鐘樹解決方案，進而簡化您的設計流程。此工具可從廣泛的計時產品資料庫中汲取資料，產生系統級多晶片計時解決方案。

支援產品和硬體
設計工具

PLLATINUMSIM-SW — PLL 迴路濾波器、相位雜訊、鎖定時間與雜散模擬工具

PLLATINUMSIM-SW 為一模擬工具，可讓使用者建立 PLLatinum™ 積體電路的詳細設計和模擬，包括 LMX 系列的相位鎖定迴路 (PLL) 及合成器。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (NKD) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片