LMV431B
- Low-Voltage Operation/Wide Adjust Range
(1.24 V/30 V) - 0.5% Initial Tolerance (LMV431B)
- Temperature Compensated for Industrial
Temperature Range (39 PPM/°C for
the LMV431AI) - Low Operation Current (55 µA)
- Low Output Impedance (0.25 Ω)
- Fast Turn-On Response
- Low Cost
The LMV431, LMV431A and LMV431B are precision 1.24 V shunt regulators capable of adjustment to 30 V. Negative feedback from the cathode to the adjust pin controls the cathode voltage, much like a non-inverting op amp configuration (Refer to Symbol and Functional Diagrams). A two-resistor voltage divider terminated at the adjust pin controls the gain of a 1.24 V band-gap reference. Shorting the cathode to the adjust pin (voltage follower) provides a cathode voltage of a 1.24 V.
The LMV431, LMV431A and LMV431B have respective initial tolerances of 1.5%, 1%, and 0.5%, and functionally lend themselves to several applications that require zener diode type performance at low voltages. Applications include a 3 V to 2.7 V low drop-out regulator, an error amplifier in a 3 V off-line switching regulator and even as a voltage detector. These parts are typically stable with capacitive loads greater than 10 nF and less than 50 pF.
The LMV431, LMV431A and LMV431B provide performance at a competitive price.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | LMV431l;LMV431Al;LMV431B Low-Voltage (1.24V) Adj Precision Shunt Regs datasheet (Rev. G) | 2014/9/22 | |||
| 電子書 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019/6/28 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
SHUNT-REFERENCE-CALC — Shunt Reference Selector and Design Calculator
SHUNT_VOLTAGE_REFERENCE_RESISTOR_CALCULATOR — Shunt Voltage Reference External Resistor Quick Start Calculator
此外部電阻快速入門計算機工具可讓您輕鬆計算相對電壓參考、電源供應和負載電流限制的有效外部電阻值。透過這些輸入，您可以立即查看計算結果，並使用顏色編碼指示來了解計算出的輸出是有效或無效值。
PMP15035 — 1000-W、雙向 12-V 至 12-V 轉換器參考設計
PMP20497 — 110W 工業 POE 隔離式返馳參考設計
PMP20551 — 12V-60V 輸入、36W 工業 PoE 隔離式返馳參考設計
TIDA-01292 — 適用於低頻離線 UPS 和逆變器且不帶散熱器的 650W 功率級參考設計
此參考設計為 650-W 逆變器功率級，專為低頻（基於變壓器）、單相 UPS（由 12-V 電池供電）而設計。此設計利用 SON5x6 封裝且具有極低 RDS (on) 與低閘極電荷 (Qg) 的 TI SMD MOSFET，實現小外型尺寸與高效率實作方案。透過在全橋式功率級的各腳上並聯使用兩個裝置，該功率級消除了散熱器的需求，進而降低整體系統成本。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
| SOT-23 (DBZ) | 3 | Ultra Librarian |