首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

LP876242-Q1

現行

適用於 AWR 和 IWR MMIC 的車用四 8.8 MHz 降壓轉換器

立即訂購
產品規格表

LP876242-Q1

現行
產品規格表 立即訂購

產品詳細資料

Processor supplier Texas Instruments Processor name mmWave AWR, mmWave IWR Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.9 Vout (max) (V) 1.9 Iout (max) (A) 4 TI functional safety category Functional Safety-Compliant Configurability Factory programmable, Software configurable Features GPIO, Overvoltage protection, SPMI, UVLO Rating Automotive Operating temperature range (°C) -40 to 125 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.033 Switching frequency (max) (kHz) 9600 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 8800 Product type Radar sensor
Processor supplier Texas Instruments Processor name mmWave AWR, mmWave IWR Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.9 Vout (max) (V) 1.9 Iout (max) (A) 4 TI functional safety category Functional Safety-Compliant Configurability Factory programmable, Software configurable Features GPIO, Overvoltage protection, SPMI, UVLO Rating Automotive Operating temperature range (°C) -40 to 125 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.033 Switching frequency (max) (kHz) 9600 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 8800 Product type Radar sensor
VQFN-HR (RQK) 32 27.5 mm² 5.5 x 5
  • AEC-Q100 Qualified with the following results:
    • Input voltage: 3.0 V to 5.5 V
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification Level 2
    • Device CDM ESD classification Level C4B
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL-D
    • Documentation available to aid IEC 61508 system design up to SIL-3
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Windowed voltage and over-current monitors
    • Watchdog with selectable trigger / Q&A mode
    • Level or PWM error signal monitoring (ESM)
    • Thermal monitoring with high temperature warning and thermal shutdown
    • Bit-integrity (CRC) error detection on configuration registers and non-volatile memory
  • 4 high-efficiency step-down DC/DC converters:
    • Output voltage: 0.9 V to 1.9 V
    • Maximum output current: 4/3/3/2 A
    • Programmable output voltage slew-rate: 0.5 mV/µs to 33 mV/µs
    • Switching frequency: 8.8 MHz
  • 10 configurable general purpose I/O (GPIO)
  • SPMI interface for multi-PMIC synchronization
  • Input overvoltage monitor (OVP) and undervoltage lockout (UVLO)

.

.
  • AEC-Q100 Qualified with the following results:
    • Input voltage: 3.0 V to 5.5 V
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification Level 2
    • Device CDM ESD classification Level C4B
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL-D
    • Documentation available to aid IEC 61508 system design up to SIL-3
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Windowed voltage and over-current monitors
    • Watchdog with selectable trigger / Q&A mode
    • Level or PWM error signal monitoring (ESM)
    • Thermal monitoring with high temperature warning and thermal shutdown
    • Bit-integrity (CRC) error detection on configuration registers and non-volatile memory
  • 4 high-efficiency step-down DC/DC converters:
    • Output voltage: 0.9 V to 1.9 V
    • Maximum output current: 4/3/3/2 A
    • Programmable output voltage slew-rate: 0.5 mV/µs to 33 mV/µs
    • Switching frequency: 8.8 MHz
  • 10 configurable general purpose I/O (GPIO)
  • SPMI interface for multi-PMIC synchronization
  • Input overvoltage monitor (OVP) and undervoltage lockout (UVLO)

.

.

The LP876242-Q1 device is designed to meet the power management requirements of the latest processors and platforms in various safety-relevant automotive and industrial applications. The device has four step-down DC/DC converter cores, generating four 1-phase outputs. The device settings can be changed by I2C-compatible serial interface or by a SPI serial interface.

The switching clock is forced to PWM mode and the phases are interleaved. The switching can be synchronized to an external clock and spread-spectrum mode can be enabled to minimize the disturbances.

The LP876242-Q1 device includes protection and diagnostic mechanisms such as register and interface CRC, short-circuit protection, thermal monitoring, and shutdown. The LP876242-Q1 device can notify the processor of these events through the interrupt handler, allowing the processor to take action in response.

The LP876242-Q1 device is designed to meet the power management requirements of the latest processors and platforms in various safety-relevant automotive and industrial applications. The device has four step-down DC/DC converter cores, generating four 1-phase outputs. The device settings can be changed by I2C-compatible serial interface or by a SPI serial interface.

The switching clock is forced to PWM mode and the phases are interleaved. The switching can be synchronized to an external clock and spread-spectrum mode can be enabled to minimize the disturbances.

The LP876242-Q1 device includes protection and diagnostic mechanisms such as register and interface CRC, short-circuit protection, thermal monitoring, and shutdown. The LP876242-Q1 device can notify the processor of these events through the interrupt handler, allowing the processor to take action in response.
filter 尋找其它 多通道 IC (PMIC)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
LP87702-Q1 現行 具有診斷功能的雙路降壓轉換器和 5V 升壓 Lower current for cascaded imaging radar applications and supports ASIL B requirements at the system level.
LP87745-Q1 現行 適用於雷達 MMIC 的汽車三路 3-A 低雜訊降壓轉換器、IO LDO 和 5-V 升壓轉換器 PMIC Small solution size for cascaded imaging radar applications and supports ASIL C requirements at the system level.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet LP876242-Q1 Four 8.8-MHz Buck Converters for AWR and IWR MMICs datasheet (Rev. A) PDF | HTML 2022年 6月 23日
Certificate LP876242Q1EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) 2022年 5月 20日
User guide LP876242-Q1 Evaluation Module (Rev. A) PDF | HTML 2022年 5月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP876242Q1EVM — 適用於雷達的車用評估模組 4A + 3A + 3A + 2A 功能安全標準降壓轉換器

LP876242Q1EVM 評估板可用於測試、示範、偵錯與配置一或多個用於汽車雷達應用的 LP876242-Q1 電源管理 IC。板載裝置為 LP876242B0RQKRQ1，該裝置具有 1+1+1+1 相配置和用於 4 個不同的輸出電壓軌的 8.8 MHz-切換頻率

使用指南: PDF | HTML
TI.com 無法提供
參考設計

TIDA-020047 — 適用於汽車 4D 成像雷達的雙裝置 mmWave 串接參考設計

此汽車雷達參考設計為串接 76-GHz 至 81-GHz 雷達感測器模組。其中包含 AWR2243 裝置的雙裝置串接陣列和 AM2732R 雷達處理器。在此串接雷達配置中，主要裝置會將 20-GHz 本機振盪器 (LO) 訊號分配至主要和次要裝置，讓這兩個裝置能以單一射頻 (RF) 收發器的形式運作。如此即可支援多達 6 個傳輸 (TX) 和 8 個接收 (RX) 天線元件，因此在多輸入多輸出 (MIMO) 虛擬陣列中總共可提供 48 個虛擬通道。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RQK) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片