OPA1S2385

現行

具整合式低電位作動開關和緩衝器的 250MHz，CMOS 轉阻放大器 (TIA)

立即訂購

產品規格表

document-pdfAcrobat 250-MHz, CMOS Transimpedance Amplifier (TIA) with Integrated Switch and Buffer datasheet (Rev. A) (英文)

OPA1S2385

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

2

GBW (typ) (MHz)

100

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Vos (offset voltage at 25°C) (max) (mV)

8

Rail-to-rail

In, Out

Features

Small Size

BW at Acl (MHz)

250

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Number of channels

2

GBW (typ) (MHz)

100

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Vos (offset voltage at 25°C) (max) (mV)

8

Rail-to-rail

In, Out

Features

Small Size

BW at Acl (MHz)

250

Operating temperature range (°C)

-40 to 85

Rating

Catalog

VSON (DRC)

10

9 mm² (3 mm × 3 mm)

Wide Bandwidth: 250 MHz
High Slew Rate: 150 V/µs
Rail-to-Rail Input/Output (I/O)
Fast Settling
Low Input Bias Current: 3 pA
High Input Impedance: 10¹³ Ω || 2 pF
SPST Switch:
- Low On-Resistance: 4 Ω
- Low Charge Injection: 1 pC
- Low Leakage Current: 10 pA
Flexible Configuration:
- Transimpedance Gain
- External Hold Capacitor
- Post-Gain
Single Supply: +2.7 V to +5.5 V
Quiescent Current: 9.2 mA
Small Package: 3-mm × 3-mm SON-10
OPA1S2384: Internal Switch Active High
OPA1S2385: Internal Switch Active Low

Wide Bandwidth: 250 MHz
High Slew Rate: 150 V/µs
Rail-to-Rail Input/Output (I/O)
Fast Settling
Low Input Bias Current: 3 pA
High Input Impedance: 10¹³ Ω || 2 pF
SPST Switch:
- Low On-Resistance: 4 Ω
- Low Charge Injection: 1 pC
- Low Leakage Current: 10 pA
Flexible Configuration:
- Transimpedance Gain
- External Hold Capacitor
- Post-Gain
Single Supply: +2.7 V to +5.5 V
Quiescent Current: 9.2 mA
Small Package: 3-mm × 3-mm SON-10
OPA1S2384: Internal Switch Active High
OPA1S2385: Internal Switch Active Low

The OPA1S2384 and OPA1S2385 (OPA1S238x) combine high bandwidth, FET-input operational amplifiers with a fast SPST CMOS switch designed for applications that require the tracking and capturing of fast signals.

By providing a 250-MHz gain bandwidth product and rail-to-rail input/output swings in single-supply operation, the OPA1S238x is capable of wideband transimpedance gain and large output signal swing simultaneously. Low input bias current and voltage noise (6 nV/√Hz) make it possible to amplify extremely low-level input signals for maximum signal-to-noise ratio.

The characteristics of the OPA1S238x make this device ideally suited for use as a wideband photodiode amplifier.

In addition, the CMOS switch and subsequent buffer amplifier allow the OPA1S238x to be easily configured as a fast sample-and-hold circuit. The external hold capacitor and post-gain options make the OPA1S238x easily adoptable to a wide range of speed and accuracy requirements. Note that the OPA1S2384 closes the internal switch with a logic-high signal, and the OPA1S2385 closes the internal switch with a logic-low signal.

The OPA1S238x are optimized for low-voltage operation from as low as +2.7 V up to +5.5 V. These devices are specified for a temperature range of –40°C to +85°C.

The OPA1S2384 and OPA1S2385 (OPA1S238x) combine high bandwidth, FET-input operational amplifiers with a fast SPST CMOS switch designed for applications that require the tracking and capturing of fast signals.

By providing a 250-MHz gain bandwidth product and rail-to-rail input/output swings in single-supply operation, the OPA1S238x is capable of wideband transimpedance gain and large output signal swing simultaneously. Low input bias current and voltage noise (6 nV/√Hz) make it possible to amplify extremely low-level input signals for maximum signal-to-noise ratio.

The characteristics of the OPA1S238x make this device ideally suited for use as a wideband photodiode amplifier.

In addition, the CMOS switch and subsequent buffer amplifier allow the OPA1S238x to be easily configured as a fast sample-and-hold circuit. The external hold capacitor and post-gain options make the OPA1S238x easily adoptable to a wide range of speed and accuracy requirements. Note that the OPA1S2384 closes the internal switch with a logic-high signal, and the OPA1S2385 closes the internal switch with a logic-low signal.

The OPA1S238x are optimized for low-voltage operation from as low as +2.7 V up to +5.5 V. These devices are specified for a temperature range of –40°C to +85°C.

filter

尋找其它轉阻放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 2

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	250-MHz, CMOS Transimpedance Amplifier (TIA) with Integrated Switch and Buffer datasheet (Rev. A)				2013/6/24
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML			2017/3/28