OPA3693
- 650MHz BANDWIDTH (G = +2)
- FIXED GAIN OF ±1 or +2
- OUTPUT VOLTAGE SWING: ±4.1V
- ULTRA-HIGH SLEW RATE: 2500V/µs
- 3RD-ORDER INTERCEPT: > 40dBm
(f < 50MHz) - LOW POWER: 130mW/channel
- LOW DISABLED POWER: 0.4mW/channel
- APPLICATIONS
- MULTIPLE LINE VIDEO DISTRIBUTION AMPLIFIER (DA)
- PORTABLE INSTRUMENTS
- BROADBAND VIDEO LINE DRIVERS
- ADC BUFFERS
- HIGH-FREQUENCY ACTIVE FILTERS
All other trademarks are the property of their respective owners.
The OPA3693 provides an easy to use, broadband, triple, fixed-gain buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or 1 voltage
buffer. The OPA3693 offers a slew rate (2500V/µs) and bandwidth
(> 800MHz) normally associated with a much higher supply current. A new output stage architecture delivers high output current with a minimal headroom and crossover distortion. This combination of features makes the OPA3693 an ideal RGB line driver or single-supply undersampling analog-to-digital converter (ADC) input driver.
The OPA3693 13mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives lower system power over temperature. System power can be further reduced using the optional disable control pin. Leaving this pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3693 supply current drops to less than 130µA/channel. This power-saving feature, along with exceptional single +5V operation, make the OPA3693 ideal for portable applications. The OPA3693 is available in an SSOP-16 package.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | Triple, Ultra-Wideband, Fixed-Gain, Video Buffer with Disable datasheet (Rev. A) | 2008/8/28 | |||
| 技術文章 | 3 common questions when designing with high-speed amplifiers | PDF | HTML | 2020/7/17 | |||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 使用指南 | DEM-OPA-SSOP-3C User's Guide | 2007/4/28 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DEM-OPA-SSOP-3D — 適用於 SSOP-16 (反相、流通針腳配置) 封裝的三路運算放大器評估模組
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SSOP (DBQ) | 16 | Ultra Librarian |