PCM1609A
- 24-Bit Resolution
- Analog Performance:
- Dynamic Range: 105 dB, Typical
- SNR: 105 dB, Typical
- THD+N: 0.002%, Typical
- Full-Scale Output: 3.1 Vp-p, Typical
- 4×/8× Oversampling Interpolation Filter:
- Stop-Band Attenuation: -55 dB
- Pass-Band Ripple: ±0.03 dB
- Sampling Frequency: 5 kHz to 200 kHz
- Accepts 16-, 18-, 20-, and 24-Bit Audio Data
- Data Formats: Standard, I2S, and Left-Justified
- System Clock: 128 fS, 192 fS, 256 fS, 384 fS, 512 fS, or 768 fS
- User-Programmable Functions:
- Digital Attenuation: 0 dB to -63 dB, 0.5 dB/Step
- Soft Mute
- Zero Flags Can Be Used As General- Purpose Logic Output
- Digital De-Emphasis
- Digital Filter Rolloff: Sharp or Slow
- Dual-Supply Operation:
- 5-V Analog
- 3.3-V Digital
- 5-V Tolerant Digital Logic Inputs
- Package: LQFP-48
- APPLICATIONS
- Integrated A/V Receivers
- DVD Movie and Audio Players
- HDTV Receivers
- Car Audio Systems
- DVD Add-On Cards for High-End PCs
- Digital Audio Workstations
- Other Multichannel Audio Systems
FilterPro is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
The PCM1609A is a CMOS, monolithic integrated circuit that features eight 24-bit audio digital-to-analog converters (DACs) and support circuitry in a small LQFP-48 package. The DACs use Texas Instruments' enhanced multilevel, delta-sigma architecture that employs fourth-order noise shaping and 8-level amplitude quantization to achieve excellent signal-to-noise performance and a high tolerance to clock jitter.
The PCM1609A accepts industry-standard audio data formats with 16- to 24-bit audio data. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a 4-wire serial control port that supports register write and read functions.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | 24-Bit 192-kHz Sampling 8-Channel Enhanced Multilevel Delta-Sigma DAC datasheet (Rev. B) | 2008年 3月 17日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
LQFP (PT) | 48 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點