產品詳細資料

Number of ADC channels 2 Sampling rate (max) (kHz) 768 Analog inputs 2 Control interface I2C Digital audio interface I2S, L, TDM THD+N (dB) -95 ADC SNR (typ) (dB) 120 Rating Automotive Operating temperature range (°C) -40 to 125 Analog outputs 0
Number of ADC channels 2 Sampling rate (max) (kHz) 768 Analog inputs 2 Control interface I2C Digital audio interface I2S, L, TDM THD+N (dB) -95 ADC SNR (typ) (dB) 120 Rating Automotive Operating temperature range (°C) -40 to 125 Analog outputs 0
WQFN (RTE) 20 9 mm² 3 x 3
  • Multichannel high-performance ADC:
    • 2-channel analog microphones or line-in
    • 4-channel digital PDM microphones
    • Up to 2 analog and up to 2 digital microphone channels
  • ADC line and microphone differential input performance:
    • Dynamic range (DR):
      • 120-dB, dynamic range enhancer (DRE) enabled
      • 108-dB, DRE disabled
    • THD+N: –95 dB
  • ADC channel summing mode, DR performance:
    • 111-dB, DRE disabled, 2-channel summing
  • ADC input voltage:
    • Differential, 2-VRMS full-scale inputs
    • Single-ended, 1-VRMS full-scale inputs
  • ADC sample rate (fS) = 8 kHz to 768 kHz
  • Programmable channel settings:
    • Channel gain: 0 dB to 42 dB, 0.5-dB steps
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Voice activity detection (VAD)
  • I2C control interface
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3 V or 1.8 V
  • I/O-supply operation: 3.3 V or 1.8 V
  • Power consumption for 1.8-V AVDD supply:
    • 9.5 mW/channel at 48-kHz sample rate
  • Multichannel high-performance ADC:
    • 2-channel analog microphones or line-in
    • 4-channel digital PDM microphones
    • Up to 2 analog and up to 2 digital microphone channels
  • ADC line and microphone differential input performance:
    • Dynamic range (DR):
      • 120-dB, dynamic range enhancer (DRE) enabled
      • 108-dB, DRE disabled
    • THD+N: –95 dB
  • ADC channel summing mode, DR performance:
    • 111-dB, DRE disabled, 2-channel summing
  • ADC input voltage:
    • Differential, 2-VRMS full-scale inputs
    • Single-ended, 1-VRMS full-scale inputs
  • ADC sample rate (fS) = 8 kHz to 768 kHz
  • Programmable channel settings:
    • Channel gain: 0 dB to 42 dB, 0.5-dB steps
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Voice activity detection (VAD)
  • I2C control interface
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3 V or 1.8 V
  • I/O-supply operation: 3.3 V or 1.8 V
  • Power consumption for 1.8-V AVDD supply:
    • 9.5 mW/channel at 48-kHz sample rate

The PCM5120-Q1 is a Burr-Brown™ high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels or four digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programmable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCM5120-Q1 is specified from –40°C to +125°C, and is offered in a 20-pin WQFN package.

The PCM5120-Q1 is a Burr-Brown™ high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels or four digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programmable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCM5120-Q1 is specified from –40°C to +125°C, and is offered in a 20-pin WQFN package.

下載 觀看有字幕稿的影片 影片

索取更多資訊

提供 PurePath™ Console 3、ADC5120EVM-PDK GUI 和其他設計資源。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
PCM6120-Q1 現行 車用、立體聲、123dB SNR、768kHz、低功率、軟體控制、音訊 ADC Higher SNR version
TLV320ADC5120 現行 具有 120-dB SNR 的立體聲通道、768-kHz、Burr-Brown™ 音訊類比轉數位轉換器 (ADC) Catalog version without AEC-Q100 qualification

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 日期
* Data sheet PCM5120-Q1 2-Channel, 768-kHz, Burr-BrownTM Audio ADC datasheet (Rev. A) PDF | HTML 2022年 7月 12日
Application note TLV320ADCx140, TLV320ADCx120, PCMx120-Q1, PCMx140-Q1 Integrated Analog Anti-Aliasing Filter and Flexible Digit (Rev. B) PDF | HTML 2024年 1月 10日
Application note Working With Analog Inputs in the TLV320ADCX120 and PCMX120-Q1 Family PDF | HTML 2023年 7月 17日
Application note Dynamic Range Enhancer and Compressor in TLV320ADCx120 and PCMx120-Q1 (Rev. A) PDF | HTML 2022年 4月 6日
Application note TLV320ADCx120 and PCMx120-Q1 Power Consumption Matrix Across Various Usage Scena (Rev. A) PDF | HTML 2022年 4月 4日
Application note Configuring and Operating TLV320ADCx120 and PCMx120-Q1 as Audio Bus Controller (Rev. A) PDF | HTML 2022年 4月 1日
Application note Input Common-Mode Tolerance & High CMRR Modes TLV320ADCx120 & PCMx120-Q1 Devices (Rev. A) PDF | HTML 2022年 4月 1日
Application note TLV320ADCx120 & PCMx120-Q1 Sampling Rates & Prog. Processing Blocks Supported (Rev. A) PDF | HTML 2022年 4月 1日
Application note TLV320ADCx120 and PCMx120-Q1 Programmable Biquad Filter Configuration and Apps (Rev. B) PDF | HTML 2022年 4月 1日
Application note Using the Automatic Gain Controller in TLV320ADCx120 and PCMx120-Q1 Family (Rev. A) PDF | HTML 2022年 4月 1日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADC5120Q1EVM-PDK — PCM5120-Q1 評估模組,用於立體聲、768kHz、具 120dB SNR 的音訊類比轉數位轉換器

ADC5120Q1EVM-PDK 評估模組 (EVM) 用於測試 PCM5120-Q1 裝置、立體聲、高性能音訊類比轉數位轉換器 (ADC) 的功能,主要用於語音啟用系統、專業麥克風、音訊會議、可攜式運算、通訊和娛樂應用。EVM 與 AC-MB (彈性主機板) 配對,可爲 EVM 提供電源、控制及數位音訊數據。

使用指南: PDF | HTML
TI.com 無法提供
應用軟體及架構

PUREPATHCONSOLE PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.

PurePath Console’s (...)
支援產品和硬體

支援產品和硬體

支援軟體

ADCX120EVM-SW GUI and software for PurePath™ Console 3 for ADC3120EVM-PDK, ADC5120EVM-PDK and ADC6120EVM-PDK

GUI and software for PurePath™ Console 3 for ADC3120EVM-PDK, ADC5120EVM-PDK and ADC6120EVM-PDK
支援產品和硬體

支援產品和硬體

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一,涵蓋我們的類比和電源產品組合,以及特定類比行為模型,且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片