SN65C1167E

現行

具 +/-8-kV IEC ESD 保護的雙差動驅動器和接收器

立即訂購

產品規格表

document-pdfAcrobat SN65C116xE Dual Differential Drivers and Receivers With ±15kV ESD Protection datasheet (Rev. C) (英文) PDF | HTML

SN65C1167E

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

2

Number of transmitters

2

Duplex

Full

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 7

Number of nodes

32

Features

IEC ESD protection

Isolated

No

Supply current (max) (µA)

9000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of receivers

2

Number of transmitters

2

Duplex

Full

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 7

Number of nodes

32

Features

IEC ESD protection

Isolated

No

Supply current (max) (µA)

9000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOP (NS)

16

79.56 mm² (10.2 mm × 7.8 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

VQFN (RGY)

16

14 mm² (4 mm × 3.5 mm)

Meet or exceed standards TIA/EIA-422-B and ITU recommendation V.11
Operate from single 5V power supply
ESD Protection for RS-422 bus pins
- ±15kV Human-body model (HBM)
- ±8kV IEC 61000-4-2, Contact discharge
- ±8kV IEC 61000-4-2, Air-gap discharge
Low supply-current requirements: 9mA maximum
Low pulse skew
Receiver input impedance: 17kΩ (Typical)
Receiver input sensitivity: ±200mV
Receiver common-mode input voltage range of –7V to +7V
Glitch-free power-up and power-down protection
Receiver 3-state outputs active-low enable (SN65C1167E only)

Meet or exceed standards TIA/EIA-422-B and ITU recommendation V.11
Operate from single 5V power supply
ESD Protection for RS-422 bus pins
- ±15kV Human-body model (HBM)
- ±8kV IEC 61000-4-2, Contact discharge
- ±8kV IEC 61000-4-2, Air-gap discharge
Low supply-current requirements: 9mA maximum
Low pulse skew
Receiver input impedance: 17kΩ (Typical)
Receiver input sensitivity: ±200mV
Receiver common-mode input voltage range of –7V to +7V
Glitch-free power-up and power-down protection
Receiver 3-state outputs active-low enable (SN65C1167E only)

The SN65C1167E and SN65C1168E consist of dual drivers and dual receivers with ±15kV ESD (Human Body Model [HBM]) and ±8-kV ESD (IEC61000-4-2 Air-Gap Discharge and Contact Discharge) for RS-422 bus pins. The devices meet the requirements of TIA/EIA-422-B and ITU recommendation V.11.

The SN65C1167E combines dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control.

SN65C1168E drivers have individual active-high enables.

The SN65C1167E and SN65C1168E consist of dual drivers and dual receivers with ±15kV ESD (Human Body Model [HBM]) and ±8-kV ESD (IEC61000-4-2 Air-Gap Discharge and Contact Discharge) for RS-422 bus pins. The devices meet the requirements of TIA/EIA-422-B and ITU recommendation V.11.

The SN65C1167E combines dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control.

SN65C1168E drivers have individual active-high enables.

filter

尋找其它 RS-485 & RS-422 收發器

下載觀看有字幕稿的影片影片