SN65LVDS31-EP
- Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
- Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
- Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
- Typical Propagation Delay Times of 1.7 ns
- Operate From a Single 3.3-V Supply
- Power Dissipation 25 mW Typical Per Driver at 200 MHz
- Driver at High Impedance When Disabled or With VCC = 0
- Bus-Terminal ESD Protection Exceeds 8 kV
- Low-Voltage TTL (LVTTL) Logic Input Levels
- Pin Compatible With AM26LS31, MC3487, and µA9638
- Cold Sparing for Space and High Reliability Applications Requiring Redundancy
The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.
The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The SN65LVDS31 is characterized for operation from –55°C to 125°C.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | SN65LVDS31-EP High-Speed Differential Line Drivers datasheet | 2011年 9月 22日 | |
| * | VID | SN65LVDS31-EP VID V6207627 | 2016年 6月 21日 | |
| * | Radiation & reliability report | SN65LVDS31MDREP Reliability Report | 2013年 1月 7日 | |
| Application brief | LVDS to Improve EMC in Motor Drives | 2018年 9月 27日 | ||
| Application brief | How Far, How Fast Can You Operate LVDS Drivers and Receivers? | 2018年 8月 3日 | ||
| Application brief | How to Terminate LVDS Connections with DC and AC Coupling | 2018年 5月 16日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
AWRL6432BOOST — 用於單晶片、低功耗 mmWave 雷達感測器的 AWRL6432BOOST BoosterPack™ 評估模組
AWRL6432BOOST 是一款易於使用的 60GHz mmWave 感測器評估套件，適用於具有 FR4 型天線的 AWRL6432 裝置。此電路板可存取點雲資料及 USB 供電介面。
AWRL6432BOOST 支援與 DCA1000EVM 直接連接。此 BoosterPack 由 mmWave 工具、示範和軟體支援，包括 mmWave 軟體開發套件 (MMWAVE-L-SDK) 和 Code Composer Studio™ 整合式開發環境 (IDE) (CCSTUDIO)。
可使用其他電路板來啟用其他功能。例如 DCA1000EVM 可存取感測器原始類比轉數位 (ADC) (...)
IWRL6432BOOST — 適用於單晶片 60GHz mmWave 低功耗感測器的 IWRL6432 BoosterPack™評估模組
IWRL6432BOOST 是一款易於使用的 60GHz mmWave 感測器評估套件，以具有板載 FR4 型天線的 IWRL6432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。IWRL6432BOOST 支援與 DCA1000EVM 開發套件直接連接。
此套件由 mmWave 工具、示範和軟體支援，包括 mmWave 軟體開發套件 (MMWAVE-L-SDK) 和 Code Composer Studio™ 整合式開發環境 (IDE) (CCSTUDIO)。
可使用其他電路板來啟用其他功能。例如 DCA1000EVM 可存取感測器的原始類比轉數位 (ADC) 資料擷取。板載 (...)
SN65LVDS31-32BEVM — 適用 LVDS31 和 LVDS32B 的 SN65LVDS31-32B 低電壓差動訊號評估模組
TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.
As seen (...)
SN65LVDS31-32EVM — 適用 SNx5LVDS31 和 SNx5LVDS32 的 SN65LVDS31-32EVM 評估模組
The SN65LVDS31-32EVM evaluation moduel (EVM) includes the SV65LVDS31 quad driver and the SN65LVDS32 quad receiver. The SN65LVDS31 device is a TIA/EIA-644 standard-compliant LVDS driver. The SN65LVDS32 device is a TIA/EIA-644 standard-compliant receiver that has a passive open-circuit failsafe (...)
SN65LVDS31-33EVM — 適用 SN65LVDS31 和 SN65LVDS33 的評估模組
TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.
As seen in the Combination (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOIC (D) | 16 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。